Wavelab-24G-Addon module

PA0MHE·Wavelab-24G-Addon-module·Kicad/V04 Kicad5/WaveLab24GHz.kicad_pcb

Wavelab-24G-Addon module layout, top view — open source AVR/Arduino board by PA0MHE
Simulate this board

About the Wavelab-24G-Addon module

Wavelab-24G-Addon module is an open source AVR/Arduino PCB design by PA0MHE, published on GitHub under the MIT license. It is a 2-layer board measuring 118.5 × 94.5 mm, with 187 components from 76 distinct parts.

Its main chip is the ATTINY85-20SU, from the AVR/Arduino family. Other key parts include the SBB3089Z, HMC213B, LFB2H2G45SG7C093, AS179-92LF and MGA-86576. By type, the board carries 80 capacitors, 59 resistors, 17 ICs, 10 diodes, 9 connectors and 8 inductors.

From the project

Can be used as addon module for the Wavelab 23X1008XP module, which was available during the 2021-2022 timeframe on www.ebay.pl seller:bisonelectronics-sp2jyr The module converts the first-IF 2364MHz to 432MHz (or 144MHz) , it als generates the required first LO of 1807MHz. It al

Can be used as addon module for the Wavelab 23X1008XP module, which was available during the 2021-2022 timeframe on www.ebay.pl seller:bisonelectronics-sp2jyr The module converts the first-IF 2364MHz to 432MHz (or 144MHz) , it als generates the required first LO of 1807MHz. It also generates all required DC value, such as 6.5V, +5V, -5V, also the required RX-TX switching is provided. The module requires a 10MHz reference signal, it has to be supplied with 7.5V DC.

Main components on the Wavelab-24G-Addon module

Wavelab-24G-Addon module bill of materials (BOM)

187 components, 76 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
SBB3089Z
U1, U5
1
HMC213B
U2
1
LFB2H2G45SG7C093
U3
2
AS179-92LF
U4, U7
1
MGA-86576
U6
1
ICL7662
U31
2
MIC29302
U32, U33
2
BD50HC5MEFJ
U34, U35
1
TC5950
U36
1
ATTINY85-20SU
ATtiny85-20SU
U51
1
ADM7151DZ-3V3
ADM7150DZ-3V3
U52
2
ADF4351
U53, U54
2
FMG1AT148
Q31, Q32
1
BC849
Q33
1
Conn_Coaxial
J1
1
Conn_LO
J2
1
Conn_TXIF
J3
1
Conn_RXIF
J4
1
7.5V
6.5V
J31
1
PTT
J32
Show 56 more
QtyPartRefs
1
Bias-T
J33
1
SMA 10MHz
J51
1
ICSP
J52
1
res
RV1
1
BAV99
D1
1
opt
D2
6
LED
D31, D32, D34, D35, D51, D52
1
res
D33
1
5V1
D36
1
res
L1
3
33N
33n
L2, L5, L6
2
100U
100u
L50, L51
2
3N9
3n9
L53, L54
1
res 1n
C1
6
220P
220p
C2, C4, C8, C21, C22, C23
1
res 220p
C3
2
22P
22p
C5, C89
5
1n
C6, C14, C15, C71, C72
3
1NF
1nF
C7, C18, C19
9
10P
10p
C9, C10, C11, C12, C13, C16, C17, C20 +1
1
res
C31
4
100P
100p
C32, C33, C87, C88
15
10U
10u
C34, C35, C36, C37, C39, C41, C42, C43 +7
2
22U
10u
C38, C40
7
100N
100n
C51, C58, C59, C63, C64, C67, C68
2
1u
C53, C55
6
10P
10p
C61, C62, C65, C66, C69, C70
10
100P
100p
C73, C74, C75, C76, C77, C78, C79, C80 +2
2
47N
47n
C83, C84
2
3N3
3n3
C85, C86
2
470P
470p
C92, C93
2
12R
R1, R10
5
220R
R2, R3, R4, R5, R25
5
res
R6, R21, R22, R23, R24
8
res
R7, R11, R13, R14, R16, R33, R48, R50
3
1K
R8, R17, R18
1
1K
R9
1
0R
R12
4
0R
R15, R26, R47, R49
1
68R
R19
1
10R
R20
1
51R
R27
1
150R
R28
8
2K2
R31, R32, R35, R36, R58, R59, R60, R61
1
100R
R34
1
4K7
R37
4
47K
R38, R40, R41, R42
1
22K
R39
1
750R
R43
1
180R
200R
R44
1
620R
R45
1
200R
R46
2
62R
R51, R53
1
270R
R52
2
5K1
R54, R55
2
470R
R56, R57

Wavelab-24G-Addon module design files

The KiCad project lives in the PA0MHE/Wavelab-24G-Addon-module repository on GitHub; these links point at the commit this page was built from.

Wavelab-24G-Addon module: common questions

What microcontroller does the Wavelab-24G-Addon module use?

The Wavelab-24G-Addon module is built around the ATTINY85-20SU, from the AVR/Arduino family.

How big is the Wavelab-24G-Addon module?

The Wavelab-24G-Addon module measures 118.5 × 94.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Wavelab-24G-Addon module?

187 components, from 76 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Wavelab-24G-Addon module design files?

From the PA0MHE/Wavelab-24G-Addon-module repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Wavelab-24G-Addon module design in my own project?

Yes, under the terms of its MIT license, which PA0MHE chose for the repository.

Can I test firmware for the Wavelab-24G-Addon module without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards