ACH-STM32-U5G9

Pablojosep·ACH-STM32-U5G9·hardware/ACH-STM32-U5G9.kicad_pcb

ACH-STM32-U5G9 PCB layout, top view — open source STM32 board by Pablojosep

About the ACH-STM32-U5G9 PCB

ACH-STM32-U5G9 is an open source STM32 PCB design by Pablojosep, published on GitHub. It is a 4-layer board measuring 220 × 300 mm, with 57 components from 27 distinct parts.

Its main chip is the STM32U5G9ZJT6Q, from the STM32 family. Other key parts include the W25Q256JVEIQ, TLV75733PDBVR and USBLC6-2SC6. By type, the board carries 29 capacitors, 11 resistors, 5 connectors, 4 ICs, 2 crystals and 2 switches.

It belongs with the iot & wireless and wearables designs in this gallery.

From the project

Hand-solderable STM32U5G9 board: 4 MB flash, 3 MB SRAM, USB DFU, 32 MB QSPI

Hand-solderable STM32U5G9 board: 4 MB flash, 3 MB SRAM, USB DFU, 32 MB QSPI

The ACH-STM32-U5G9 is an Achiraware Electronics development board built around the STM32U5G9ZJT6Q. It is the high-capacity ARM board in the catalog: the microcontroller itself holds 4 MB of flash and 3 MB of SRAM, and a Winbond W25Q256 adds 32 MB of quad-SPI NOR. The package is LQFP144 (20×20 mm, 0.5 mm pitch), so it can be soldered with flux and a drag technique. There is no BGA on the board.

Main components on the ACH-STM32-U5G9

ACH-STM32-U5G9 bill of materials (BOM)

57 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32U5G9ZJT6Q
U1
1
W25Q256JVEIQ
U2
1
TLV75733PDBVR
U3
1
USBLC6-2SC6
U4
1
16MHz
Y1
1
32.768kHz
Y2
1
TYPE-C-31-M-12
USB-C
J1
1
SM04B-SRSS-TB
AchiWire
J2
1
SWD
J3
1
GPIO_L
J4
1
GPIO_R
J5
1
RESET
SW1
1
BOOT
SW2
1
PWR
D1
1
LED_USR
D2
1
600R
FB1
1
2.2uH
L1
17
100nF
C1, C2, C3, C4, C5, C6, C7, C8 +9
4
1uF
C24, C26, C31, C32
2
10uF
C30, C33
Show 7 more
QtyPartRefs
2
2.2uF
C40, C41
2
6.8pF
C50, C51
2
3.9pF
C52, C53
5
10K
10k
R1, R2, R7, R8, R9
2
1k
R3, R4
2
5.1K
5.1k
R5, R6
2
4.7K
4.7k
R10, R11

ACH-STM32-U5G9 design files

The KiCad project lives in the Pablojosep/ACH-STM32-U5G9 repository on GitHub; these links point at the commit this page was built from.

ACH-STM32-U5G9: common questions

What microcontroller does the ACH-STM32-U5G9 use?

The ACH-STM32-U5G9 is built around the STM32U5G9ZJT6Q, from the STM32 family.

How big is the ACH-STM32-U5G9 PCB?

The ACH-STM32-U5G9 measures 220 × 300 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the ACH-STM32-U5G9?

57 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ACH-STM32-U5G9 design files?

From the Pablojosep/ACH-STM32-U5G9 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ACH-STM32-U5G9 design in my own project?

The repository has no license, so all rights stay with Pablojosep. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ACH-STM32-U5G9 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards