24 open source boards using the TLV75733PDBVR
Real designs built with the TLV75733PDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Ecp5-dev board
medhyal
68 × 43 mm107 parts4LNo license10FPGA
Apple IIe MMU 3V3
frozen-signal
17.5 × 51.3 mm41 parts4LCC-BY-4.06ESP32
Teensy4 esp32 sd usb host breakout
blackketter
22.9 × 55.9 mm33 parts2LNo license5FPGA
Apple IIe IOU 3V3
frozen-signal
17.5 × 51.3 mm47 parts4LCC-BY-4.04STM32
Hvsd-3ch
ExcessiveOverkill
109 × 231.4 mm457 parts4LNo license3ESP32
Prototype Rev-
DiegoBriceno03
59.9 × 66.3 mm104 parts2LNo license3ESP32
Nitrokey lora hardware
Nitrokey
40 × 17.6 mm87 parts4LNo license2RP2040/RP2350
RP2350
engelberd
51.4 × 31.4 mm85 parts4LNo license2ESP32
Controller
sudo-junkie
127.9 × 33.6 mm101 parts4LNo license1STM32
BetsyBoardBig
engstad
48 × 48 mm70 parts4LNo license1Aesa
tieziyun
192 × 315.1 mm2040 parts4LNo license0STM32
Fome mc
halbritt
162 × 115 mm462 parts4LNo license0STM32
Custom flight controller
Ekta-Gupta27
51 × 53.5 mm122 parts6LNo license0STM32
GeoLock
sudo-junkie
75.1 × 62.9 mm91 parts2LGPL-2.00ESP32
Acculux device
jjhcwoo
90 × 50 mm90 parts4LNo license0ESP32
Garage controller
Bespoke-Technology-Group
90 × 60 mm78 parts4LNo license0STM32
The-Eagle
sbbxiii
40 × 40 mm71 parts4LMIT0AVR/Arduino
Digital Timer Switch
sudo-junkie
82.6 × 76.2 mm65 parts2LNo license0ESP32
Esp32-lora gps tracker
bogdan-kovalchuk
65 × 45 mm63 parts4LMIT0ESP32
MitsubishiSC
loozhengyuan
50 × 43 mm60 parts6LMIT0STM32
ACH-STM32-U5G9
Pablojosep
220 × 300 mm57 parts4LNo license0ESP32
Especcy
5haman
20.8 × 34.8 mm21 parts2LGPL-3.00STM32
Enepaq TempSensor Board
SCFormulaElectric
68.9 × 129.2 mm157 parts4LNo license9ESP32
Test
DiegoBriceno03
70.6 × 66.3 mm104 parts2LNo license3
How designs wire the TLV75733PDBVR
Read from the KiCad layouts of 23 open source designs, one per repository: what each pin of the TLV75733PDBVR connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin is tied to 3.3V on 20 of 22 designs.
- The IN pin is tied to 5V on 19 of 23 designs (a signal on 3).
- The EN pin is tied to 5V on 18 of 23 designs (a signal on 5).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 5V 83% | — |
| GNDpin 2 | Connected to: GND 96% | — |
| ENpin 3 | Connected to: 5V 78% · a signal 22% | — |
| NCpin 4 | Connected to: Not connected 95% | — |
| OUTpin 5 | Connected to: 3.3V 91% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ecp5-dev board by medhyal, Enepaq TempSensor Board by SCFormulaElectric, Apple IIe MMU 3V3 by frozen-signal and Teensy4 esp32 sd usb host breakout by blackketter.
The TLV75733PDBVR in open source designs
The gallery holds 24 open source boards using the TLV75733PDBVR from 23 GitHub repositories; a typical one measures about 66.5 × 52.4 mm and carries around 86 components.
75% use four copper layers or more, and 29% carry an open source license.
The most starred is Ecp5-dev board by medhyal.
Parts used alongside the TLV75733PDBVR
Microcontrollers on boards using the TLV75733PDBVR
What boards using the TLV75733PDBVR are built for
TLV75733PDBVR: common questions
Where can I find a TLV75733PDBVR reference design?
Each of the 24 boards on this page is a real design using the TLV75733PDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV75733PDBVR OUT pin connected?
The OUT pin is tied to 3.3V on 20 of 22 designs. Counted from the KiCad layouts of 23 open source designs using the TLV75733PDBVR.
How is the TLV75733PDBVR IN pin connected?
The IN pin is tied to 5V on 19 of 23 designs (a signal on 3). Counted from the KiCad layouts of 23 open source designs using the TLV75733PDBVR.
How is the TLV75733PDBVR EN pin connected?
The EN pin is tied to 5V on 18 of 23 designs (a signal on 5). Counted from the KiCad layouts of 23 open source designs using the TLV75733PDBVR.
What parts are used alongside the TLV75733PDBVR?
The USBLC6-2SC6, ICM-42688-P, 74LVC245ABQ,115, LCMXO2-256HC-4MG132C and TPS54202DDCR appear in the most repositories here.
Which microcontrollers do boards using the TLV75733PDBVR use?
Most are built on ESP32 (10), STM32 (8), FPGA (3) and AVR/Arduino (1).
How big is a typical board using the TLV75733PDBVR?
The median is 66.5 × 52.4 mm, and 25% are two-layer designs.
What is the most popular open source board using the TLV75733PDBVR?
By GitHub stars, Ecp5-dev board by medhyal, with 10 stars.
Can I simulate one of these boards using the TLV75733PDBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.