AMS-Reg-Breakout
Pan-Robotics·AMS-Reg-Breakout·AMS1117-Adjustable-Breakout/AMS1117-Adjustable-Breakout.kicad_pcb
About the AMS-Reg-Breakout
AMS-Reg-Breakout is an open source PCB design by Pan-Robotics, published on GitHub. It is a 2-layer board measuring 27.6 × 20.6 mm, with 9 components from 9 distinct parts.
Other key parts include the AMS1117. By type, the board carries 2 connectors, 2 capacitors, 1 IC, 1 fuse and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Breakout PCB for AMS1117 LDO Voltage Regulator
• AMS1117 LDO Regulator: At the heart of our breakout board lies the AMS1117, a trusted and proven Low Dropout Voltage Regulator. It provides a seamless transition from higher input voltages to a stable and precise output voltage, ensuring your circuits receive the power they need with minimal fluctuations. • Wide Voltage Range: Input voltage from 3.6 V to 18 V, Max Ouptut 12V with 1A max current draw. • Efficient and Reliable Design: Our breakout board is designed with efficiency and safety in mind, with a 1.2A fuse protecting your circuit elements from over current events, and a heat sink…
Main components on the AMS-Reg-Breakout
AMS-Reg-Breakout bill of materials (BOM)
9 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117 | SOT-223-3_TabPin2 | U1 |
| 1 | Input | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Output | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | CADJ1 |
| 1 | 1.25A | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 500R | Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | Red | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
AMS-Reg-Breakout design files
The KiCad project lives in the Pan-Robotics/AMS-Reg-Breakout repository on GitHub; these links point at the commit this page was built from.
AMS-Reg-Breakout: common questions
How big is the AMS-Reg-Breakout?
The AMS-Reg-Breakout measures 27.6 × 20.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AMS-Reg-Breakout?
9 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AMS-Reg-Breakout design files?
From the Pan-Robotics/AMS-Reg-Breakout repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AMS-Reg-Breakout design in my own project?
The repository has no license, so all rights stay with Pan-Robotics. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979