Ms9282 carrier
parzivail·dxc3000-hdmi·ms9282_carrier/ms9282_carrier.kicad_pcb
About the Ms9282 carrier PCB
Ms9282 carrier is an open source PCB design by parzivail, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 55 × 55 mm, with 49 components from 21 distinct parts.
Other key parts include the MS9282_C42374505, TLV1117-18 and AMS1117-3.3. By type, the board carries 20 capacitors, 18 resistors, 3 ICs, 3 diodes, 2 connectors and 2 inductors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
MS9282-based HDMI conversion module for the Sony DXC-3000(A)
This repository is split into multiple KiCad projects.
Contains the blank PCB that matches the physical dimensions and 50-pin header of the backplane modules
The DXC-3000A backplane-to-FPC breakout board Directory: modulebreakout
The video conditioner "shield" for the MS9282 breakout Directory: ms9282carrieradapter`
Pairs with the MS9282 breakout from above.
Contains the complete MS9282-based EN-39 substitute for HDMI conversion. The image shows it in comparison with the original EN-39 module.

Main components on the Ms9282 carrier
Ms9282 carrier bill of materials (BOM)
49 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MS9282_C42374505 | LQFP-64_L10.0-W10.0-P0.50-LS12.0-BL | U1 |
| 1 | TLV1117-18 | SOT-223-3_TabPin2 | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | Crystal_GND24 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | HDMI_A | HDMI_A_Molex_208658-1001_Horizontal | J1 |
| 1 | STEMMA QT | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 2 | D | D_SOD-123F | D1, D2 |
| 1 | LED | LED_0603_1608Metric | D3 |
| 2 | 90R @ 100MHz | L_0805_2012Metric | L1, L2 |
| 7 | 0.1uF | C_0402_1005Metric | C1, C2, C3, C5, C6, C7, C8 |
| 6 | 47nF | C_0402_1005Metric | C4, C12, C13, C14, C15, C16 |
| 2 | 22pF | C_0402_1005Metric | C9, C10 |
| 1 | 1nF | C_0402_1005Metric | C11 |
| 2 | 100uF | C_1206_3216Metric | C17, C18 |
| 2 | 10uF | C_0402_1005Metric | C20, C22 |
| 4 | 100 | R_0402_1005Metric | R1, R2, R3, R4 |
| 6 | 75 | R_0402_1005Metric | R5, R6, R7, R8, R9, R10 |
| 1 | 1k 1% | R_0402_1005Metric | R11 |
| 2 | 3k | R_0402_1005Metric | R12, R13 |
| 4 | 10k | R_0402_1005Metric | R14, R15, R16, R17 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1k | R_0402_1005Metric | R53 |
Ms9282 carrier design files
The KiCad project lives in the parzivail/dxc3000-hdmi repository on GitHub; these links point at the commit this page was built from.
Ms9282 carrier: common questions
How big is the Ms9282 carrier PCB?
The Ms9282 carrier measures 55 × 55 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Ms9282 carrier?
49 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ms9282 carrier design files?
From the parzivail/dxc3000-hdmi repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ms9282 carrier design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which parzivail chose for the repository.
More boards in dxc3000-hdmi
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979