Ms9282 carrier adapter
parzivail·dxc3000-hdmi·ms9282_carrier_adapter/ms9282_carrier_adapter.kicad_pcb
About the Ms9282 carrier adapter PCB
Ms9282 carrier adapter is an open source PCB design by parzivail, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 40 × 50 mm, with 12 components from 6 distinct parts.
By type, the board carries 7 resistors, 3 transistors, 1 connector and 1 capacitor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
MS9282-based HDMI conversion module for the Sony DXC-3000(A)
This repository is split into multiple KiCad projects.
Contains the blank PCB that matches the physical dimensions and 50-pin header of the backplane modules
The DXC-3000A backplane-to-FPC breakout board Directory: modulebreakout
The video conditioner "shield" for the MS9282 breakout Directory: ms9282carrieradapter`
Pairs with the MS9282 breakout from above.
Contains the complete MS9282-based EN-39 substitute for HDMI conversion. The image shows it in comparison with the original EN-39 module.

Ms9282 carrier adapter bill of materials (BOM)
12 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | NPN | SOT-23 | Q101, Q102, Q103 |
| 1 | Conn_01x40_MountingPin | Hirose_FH12-40S-0.5SH_1x40-1MP_P0.50mm_Horizontal | J102 |
| 1 | 100uF 10V | C_1206_3216Metric | C101 |
| 1 | 33R | R_0402_1005Metric | R101 |
| 3 | 100R | R_0402_1005Metric | R102, R104, R106 |
| 3 | 68R | R_0603_1608Metric | R103, R105, R107 |
Ms9282 carrier adapter design files
The KiCad project lives in the parzivail/dxc3000-hdmi repository on GitHub; these links point at the commit this page was built from.
Ms9282 carrier adapter: common questions
How big is the Ms9282 carrier adapter PCB?
The Ms9282 carrier adapter measures 40 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ms9282 carrier adapter?
12 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ms9282 carrier adapter design files?
From the parzivail/dxc3000-hdmi repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ms9282 carrier adapter design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which parzivail chose for the repository.
More boards in dxc3000-hdmi
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979