Temp4x4
patrislav1·temp4x4
About the Temp4x4 PCB
Temp4x4 is an open source PCB design by patrislav1, published on GitHub. It is a 2-layer board measuring 51.8 × 26.4 mm, with 45 components from 14 distinct parts.
Other key parts include the LP5907MFX-3.3_NOPB and ADS124S08IPBS. By type, the board carries 21 capacitors, 16 resistors, 6 connectors and 2 ICs.
It belongs with the dev boards & breakouts, sensors and test & measurement designs in this gallery.
From the project
Arduino shield for RTD temperature measurement
A simple temperature measurement board supporting four 4-wire RTDs, using an ADS124S08.
Main components on the Temp4x4
Temp4x4 bill of materials (BOM)
45 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LP5907MFX-3.3_NOPB | SOT-23-5_HandSoldering | U1 |
| 1 | ADS124S08IPBS | LQFP-32_5x5mm_P0.5mm | U2 |
| 1 | RTD4 | screw_term_4x | J1 |
| 1 | NUCLEO_CN6_1-6 | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | RTD3 | screw_term_4x | J3 |
| 1 | NUCLEO_CN5_10-1 | PinHeader_1x10_P2.54mm_Vertical | J4 |
| 1 | RTD1 | screw_term_4x | J5 |
| 1 | RTD2 | screw_term_4x | J6 |
| 3 | 1uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C15 |
| 1 | 330nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 2 | 0.1uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C6 |
| 15 | C | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C7, C8, C9, C10, C11, C12, C13 +7 |
| 5 | 47 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R4, R5, R7 |
| 11 | R | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R6, R8, R9, R10, R11, R12, R13 +3 |
Temp4x4 design files
The KiCad project lives in the patrislav1/temp4x4 repository on GitHub; these links point at the commit this page was built from.
- Layouttemp4x4.kicad_pcb
Temp4x4: common questions
How big is the Temp4x4 PCB?
The Temp4x4 measures 51.8 × 26.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Temp4x4?
45 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Temp4x4 design files?
From the patrislav1/temp4x4 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Temp4x4 design in my own project?
The repository has no license, so all rights stay with patrislav1. Use it as a reference, and ask the author before reusing the design.
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kSensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k