HardLabs

Pico v9k

pauldevine·pico_v9k·hardware/Victor9K_pga2350.kicad_pcb

Pico v9k PCB layout, top view — open source RP2040/RP2350 board by pauldevine

About the Pico v9k PCB

Pico v9k is an open source RP2040/RP2350 PCB design by pauldevine, published on GitHub. It is a 4-layer board measuring 232.7 × 134.3 mm, with 27 components from 20 distinct parts.

Its main chip is the PICO DEBUG, from the RP2040/RP2350 family. Other key parts include the SN74LVC1G04QDCKRQ1 and Pimoroni_PGA2350. By type, the board carries 10 capacitors, 6 resistors, 4 connectors, 2 diodes, 1 IC and 1 module.

Main components on the Pico v9k

SN74LVC1G04QDCKRQ1Pimoroni_PGA2350

Pico v9k bill of materials (BOM)

27 components, 20 distinct parts.

QtyPartRefs
1
SN74LVC1G04QDCKRQ1
IC1
1
Pimoroni_PGA2350
A1
1
PICO DEBUG
J1
1
SPI Breakout
J2
1
USB C DX07S016JA1R1500
J4
1
UART
J5
1
Victor 9K Expansion Port
GF1
1
Micro_SD_Card
Jd1
1
BOOTSEL
SW1
2
1N4148
D1, D2
1
100µF
C1
2
10µF
C2, C10
1
1µF
C3
5
0.1µF
C4, C5, C6, C11, C12
1
.01µF
C7
2
5K1
R1, R2
1
470Ω
R3
1
2.2KΩ
R4
1
4609X-101-473LF
47KΩ
RN1
1
2.7KΩ
RN2

Pico v9k design files

The KiCad project lives in the pauldevine/pico_v9k repository on GitHub; these links point at the commit this page was built from.

Pico v9k: common questions

What microcontroller does the Pico v9k use?

The Pico v9k is built around the PICO DEBUG, from the RP2040/RP2350 family.

How big is the Pico v9k PCB?

The Pico v9k measures 232.7 × 134.3 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Pico v9k?

27 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pico v9k design files?

From the pauldevine/pico_v9k repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pico v9k design in my own project?

The repository has no license, so all rights stay with pauldevine. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pico v9k without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards