7 open source boards using the Pimoroni PGA2350
Real designs built with the Pimoroni PGA2350, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Megafrank
rh1tech
149.9 × 99.5 mm256 parts2LGPL-3.065GameConsoleV2
ThroatyMumbo
200 × 150 mm38 parts4LMIT15Mega frank u4
evgs
149.9 × 99.5 mm256 parts2LNo license1RP2040/RP2350
Pico v9k
pauldevine
232.7 × 134.3 mm27 parts4LNo license1Frank pga
rh1tech
99.5 × 83.1 mm171 parts2LGPL-3.065ESP8266
Oldskool
rh1tech
100 × 79 mm100 parts2LGPL-3.065Xt8086 alpha
rh1tech
99.9 × 78 mm80 parts2LGPL-3.065
The Pimoroni PGA2350 in open source designs
The gallery holds 7 open source boards using the Pimoroni PGA2350 from 4 GitHub repositories; a typical one measures about 149.9 × 99.5 mm and carries around 100 components.
71% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.
The most starred is Megafrank by rh1tech.
Parts used alongside the Pimoroni PGA2350
Microcontrollers on boards using the Pimoroni PGA2350
What boards using the Pimoroni PGA2350 are built for
Pimoroni PGA2350: common questions
Where can I find a Pimoroni PGA2350 reference design?
Each of the 7 boards on this page is a real design using the Pimoroni PGA2350. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the Pimoroni PGA2350?
The 74HC4052D,653, 74HC595, 74HC74, AMS1117-3.3 and CD4069UBM appear in the most repositories here.
Which microcontrollers do boards using the Pimoroni PGA2350 use?
Most are built on ESP8266 (1) and RP2040/RP2350 (1).
How big is a typical board using the Pimoroni PGA2350?
The median is 149.9 × 99.5 mm, and 71% are two-layer designs.
What is the most popular open source board using the Pimoroni PGA2350?
By GitHub stars, Megafrank by rh1tech, with 65 stars.
Can I simulate one of these boards using the Pimoroni PGA2350 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.