ORN8 2HP Ext. Panel (Trig + TRS MIDI + USB-A)
About the ORN8 2HP Ext. Panel (Trig + TRS MIDI + USB-A) PCB
ORN8 2HP Ext. Panel (Trig + TRS MIDI + USB-A) is an open source PCB design by PaulStoffregen, published on GitHub. It is a 2-layer board measuring 10.2 × 99.2 mm, with 10 components from 9 distinct parts.
By type, the board carries 8 connectors and 2 resistors.
It belongs with the audio designs in this gallery.
From the project
Ornament and Crime Optimized With Teensy 4.1
ORN8 2HP Ext. Panel (Trig + TRS MIDI + USB-A) bill of materials (BOM)
10 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HOST_USB | USB_A_AliExpress_Vertical | J1 |
| 1 | HOST_USB_PINS | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | TR_3_JACK | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J3 |
| 1 | TR_3_PINS | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | TR_4_JACK | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J5 |
| 1 | TR_4_PINS | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | PJ366ST MIDI_JACK | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J7 |
| 1 | MIDI_PINS | PinHeader_1x02_P2.54mm_Vertical | J8 |
| 2 | RC0805FR-07100KL 100K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
ORN8 2HP Ext. Panel (Trig + TRS MIDI + USB-A) design files
The KiCad project lives in the PaulStoffregen/O_C_T41 repository on GitHub; these links point at the commit this page was built from.
ORN8 2HP Ext. Panel (Trig + TRS MIDI + USB-A): common questions
How big is the ORN8 2HP Ext. Panel (Trig + TRS MIDI + USB-A) PCB?
The ORN8 2HP Ext. Panel (Trig + TRS MIDI + USB-A) measures 10.2 × 99.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ORN8 2HP Ext. Panel (Trig + TRS MIDI + USB-A)?
10 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ORN8 2HP Ext. Panel (Trig + TRS MIDI + USB-A) design files?
From the PaulStoffregen/O_C_T41 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ORN8 2HP Ext. Panel (Trig + TRS MIDI + USB-A) design in my own project?
The repository has no license, so all rights stay with PaulStoffregen. Use it as a reference, and ask the author before reusing the design.
More boards in O_C_T41
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687