HardLabs

PCB dev stm32f302

PCBrs·CDR-Electronique·PCB_dev_stm32f302/PCB_dev_stm32f302.kicad_pcb

PCB dev stm32f302 layout, top view — open source STM32 board by PCBrs

About the PCB dev stm32f302

PCB dev stm32f302 is an open source STM32 PCB design by PCBrs, published on GitHub. It is a 4-layer board measuring 51 × 19.7 mm, with 31 components from 21 distinct parts.

Its main chip is the STM32F302C6Tx, from the STM32 family. Other key parts include the NCP1117-3.3_SOT223. By type, the board carries 13 capacitors, 7 resistors, 3 connectors, 3 diodes, 2 ICs and 2 switches.

It belongs with the robotics & motion designs in this gallery.

From the project

Carte électronique pour la Coupe de France de robotique

La carte principale est basée sur une Teensy 4.1, la communication est faite par Wi-Fi via un ESP32 et la communication interne du robot via un bus CAN. Les cartes sont modulaires et spécifiques, on peut ajouter plusieurs fois le meme types de cartes il faut juste changer l'ID CAN de la carte en soft. Le microcontroleur des cartes périphériques est un STM32F302C8T6.

Main components on the PCB dev stm32f302

STM32F302C6TxNCP1117-3.3_SOT223

PCB dev stm32f302 bill of materials (BOM)

31 components, 21 distinct parts.

QtyPartRefs
1
STM32F302C6Tx
U1
1
NCP1117-3.3_SOT223
U2
1
8MHz
Y1
1
USB_C_Receptacle_USB2.0
J1
1
HEADER_PA
J2
1
HEADER_PB
J4
1
BOOT
SW1
1
RST
SW2
1
LED_33V
D1
1
LED_5V
D2
1
LED_DEBUG
D3
2
18p
C1, C2
1
0.1u
C4
4
10u
C6, C8, C11, C15
4
100n
C7, C9, C10, C12
2
47p
C13, C14
2
270
R1, R8
1
10k
R2
1
560
R3
1
1.5k
R4
Show 1 more
QtyPartRefs
2
5.1k
R11, R12

PCB dev stm32f302 design files

The KiCad project lives in the PCBrs/CDR-Electronique repository on GitHub; these links point at the commit this page was built from.

PCB dev stm32f302: common questions

What microcontroller does the PCB dev stm32f302 use?

The PCB dev stm32f302 is built around the STM32F302C6Tx, from the STM32 family.

How big is the PCB dev stm32f302?

The PCB dev stm32f302 measures 51 × 19.7 mm, has 4 copper layers and is 4.69 mm thick.

How many components are on the PCB dev stm32f302?

31 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCB dev stm32f302 design files?

From the PCBrs/CDR-Electronique repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PCB dev stm32f302 design in my own project?

The repository has no license, so all rights stay with PCBrs. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCB dev stm32f302 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in CDR-Electronique

Similar boards