HardLabs

Rmeasure V1 Board

PCBrs·CDR-Electronique·Rmeasure_V1_Board/Rmeasure_V1_Board.kicad_pcb

Rmeasure V1 Board layout, top view — open source STM32 board by PCBrs

About the Rmeasure V1 Board

Rmeasure V1 Board is an open source STM32 PCB design by PCBrs, published on GitHub. It is a 2-layer board measuring 58 × 28.5 mm, with 41 components from 25 distinct parts.

Its main chip is the STM32F302C6Tx, from the STM32 family. Other key parts include the NCP1117-3.3_SOT223 and SN65HVD232. By type, the board carries 15 capacitors, 12 resistors, 5 diodes, 4 connectors, 3 ICs and 1 crystal.

It belongs with the robotics & motion designs in this gallery.

From the project

Carte électronique pour la Coupe de France de robotique

La carte principale est basée sur une Teensy 4.1, la communication est faite par Wi-Fi via un ESP32 et la communication interne du robot via un bus CAN. Les cartes sont modulaires et spécifiques, on peut ajouter plusieurs fois le meme types de cartes il faut juste changer l'ID CAN de la carte en soft. Le microcontroleur des cartes périphériques est un STM32F302C8T6.

Main components on the Rmeasure V1 Board

STM32F302C6TxNCP1117-3.3_SOT223SN65HVD232

Rmeasure V1 Board bill of materials (BOM)

41 components, 25 distinct parts.

QtyPartRefs
1
STM32F302C6Tx
U1
1
NCP1117-3.3_SOT223
U2
1
SN65HVD232
U3
1
8MHz
Y1
1
USB_C_Receptacle_USB2.0
J1
1
CON_debug
J2
2
CON_CAN
J4, J5
1
JUMPER
JP1
1
LED_33V
D1
1
LED_5V
D2
1
LED_DEBUG
D3
1
LED_RGBA
D4
1
TVS
D5
2
18p
C1, C2
1
10u
C3
1
0.1u
C4
4
10u
C6, C8, C11, C15
5
100n
C7, C9, C10, C12, C16
2
47p
C13, C14
6
270
R1, R3, R5, R6, R7, R8
Show 5 more
QtyPartRefs
1
10k
R2
1
1.5k
R4
1
1k
R9
1
120
R10
2
5.1k
R11, R12

Rmeasure V1 Board design files

The KiCad project lives in the PCBrs/CDR-Electronique repository on GitHub; these links point at the commit this page was built from.

Rmeasure V1 Board: common questions

What microcontroller does the Rmeasure V1 Board use?

The Rmeasure V1 Board is built around the STM32F302C6Tx, from the STM32 family.

How big is the Rmeasure V1 Board?

The Rmeasure V1 Board measures 58 × 28.5 mm, has 2 copper layers and is 1.6002 mm thick.

How many components are on the Rmeasure V1 Board?

41 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rmeasure V1 Board design files?

From the PCBrs/CDR-Electronique repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Rmeasure V1 Board design in my own project?

The repository has no license, so all rights stay with PCBrs. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Rmeasure V1 Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in CDR-Electronique

Similar boards