Chinese diesel heater esp32

peakhunt·chinese-diesel-heater-esp32·pcb/diesel-heater-esp32.kicad_pcb

Chinese diesel heater esp32 PCB layout, top view — open source ESP32 board by peakhunt

About the Chinese diesel heater esp32 PCB

Chinese diesel heater esp32 is an open source ESP32 PCB design by peakhunt, published on GitHub under the MIT license. It is a 2-layer board measuring 60 × 45 mm, with 27 components from 18 distinct parts.

Its main chip is the ESP32 Left, from the ESP32 family. By type, the board carries 14 resistors, 12 connectors and 1 capacitor.

From the project

chinese diesel heater controller using esp32

Dangerous! No safety functions implemented on purpose of full manual control!

Chinese diesel heater esp32 bill of materials (BOM)

27 components, 18 distinct parts.

QtyPartRefs
1
5V Power
J1
1
ESP32 Left
J2
1
Hall Sensor
J3
1
Buttons
J4
1
Battery Mon
J5
1
ESP32 Right
J6
1
OLED
J7
1
NTC50K Room Temperatire
J8
1
NTC50K Outlet Temperatire
J9
1
Fan Motor
J10
1
Glow Plug
J11
1
Oil Pump
J12
1
470uF
C1
8
2K
R1, R2, R3, R4, R11, R12, R13, R14
1
33K
R5
1
3.3K
R6
2
1K
R7, R8
2
51K
R9, R10

Chinese diesel heater esp32 design files

The KiCad project lives in the peakhunt/chinese-diesel-heater-esp32 repository on GitHub; these links point at the commit this page was built from.

Chinese diesel heater esp32: common questions

What microcontroller does the Chinese diesel heater esp32 use?

The Chinese diesel heater esp32 is built around the ESP32 Left, from the ESP32 family.

How big is the Chinese diesel heater esp32 PCB?

The Chinese diesel heater esp32 measures 60 × 45 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Chinese diesel heater esp32?

27 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Chinese diesel heater esp32 design files?

From the peakhunt/chinese-diesel-heater-esp32 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Chinese diesel heater esp32 design in my own project?

Yes, under the terms of its MIT license, which peakhunt chose for the repository.

Can I test firmware for the Chinese diesel heater esp32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards