Elfii-32k board

peclark1·elfii-32k-board·hardware/kicad/elfii-32k-board.kicad_pcb

Elfii-32k board layout, top view — open source board by peclark1

About the Elfii-32k board

Elfii-32k board is an open source PCB design by peclark1, published on GitHub. It is a 2-layer board measuring 177.8 × 127.1 mm, with 14 components from 9 distinct parts.

Other key parts include the 74HCT273, 62256, 74HCT04, 74HCT86 and 74HCT32. By type, the board carries 5 ICs, 5 capacitors, 2 jumpers and 2 resistors.

From the project

Work in progress; not a fabrication or installation release.

Work in progress; not a fabrication or installation release.

- elfii-32k-board.kicadsch: active electrical design, rebuilt from the AVI Hyperboard Rev 2 SRAM/address/page-select circuit. - ELFII32K.kicadsym: project-specific schematic symbols. - elfii-32k-board.kicadpcb: previous A5 copper routing study. Its track netlist is from the obsolete custom 74HCT273/XOR/OR circuit. Do not assume that this PCB matches the current schematic. - ELFIIExpansion.pretty and ELFIIExpansion.kicadsym: the measured genuine full-size two-sided 86-contact ELF II card edge, preserved unchanged. -…

Main components on the Elfii-32k board

Elfii-32k board bill of materials (BOM)

14 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
74HCT273
U1
1
62256
U2
1
74HCT04
U3
1
74HCT86
U4
1
74HCT32
U5
1
REGION_SELECT
JP1
1
CARD_ENABLE
JP2
5
100n
C1, C2, C3, C4, C5
2
10k
R1, R2

Elfii-32k board design files

The KiCad project lives in the peclark1/elfii-32k-board repository on GitHub; these links point at the commit this page was built from.

Elfii-32k board: common questions

How big is the Elfii-32k board?

The Elfii-32k board measures 177.8 × 127.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Elfii-32k board?

14 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Elfii-32k board design files?

From the peclark1/elfii-32k-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Elfii-32k board design in my own project?

The repository has no license, so all rights stay with peclark1. Use it as a reference, and ask the author before reusing the design.