24 open source boards using the 74HCT273

Real designs built with the 74HCT273, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

24 boardsClear filters|Most starred

How designs wire the 74HCT273

Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the 74HCT273 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 13 of 20 designs, most often 100 nF (then 22 pF).
GNDpin 10Connected to: GND 100%
VCCpin 20Connected to: VCC 100%
  • Decoupling capacitor on 65% · 100 nF (11), 22 pF (1), 1 µF (1)

18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Mainboard by skiselev, 8bit computer by vascofazza, Tom80 by anjennings and LittleSixteen by SukkoPera.

The 74HCT273 in open source designs

The gallery holds 24 open source boards using the 74HCT273 from 20 GitHub repositories; a typical one measures about 166.6 × 107.3 mm and carries around 62 components.

83% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.

The most starred is Omega-Mainboard by skiselev.

Microcontrollers on boards using the 74HCT273

74HCT273: common questions

Where can I find a 74HCT273 reference design?

Each of the 24 boards on this page is a real design using the 74HCT273. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HCT273 VCC pin?

The VCC pin has a decoupling capacitor on 13 of 20 designs, most often 100 nF (then 22 pF). Counted from the KiCad layouts of 20 open source designs using the 74HCT273.

What parts are used alongside the 74HCT273?

The 74HCT04, 74HCT02, 74HCT138, 74HCT157 and SST39SF040 appear in the most repositories here.

Which microcontrollers do boards using the 74HCT273 use?

Most are built on AVR/Arduino (2) and RP2040/RP2350 (1).

How big is a typical board using the 74HCT273?

The median is 166.6 × 107.3 mm, and 83% are two-layer designs.

What is the most popular open source board using the 74HCT273?

By GitHub stars, Omega-Mainboard by skiselev, with 456 stars.

Can I simulate one of these boards using the 74HCT273 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part