17 open source boards using the 74HCT86
Real designs built with the 74HCT86, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
8bit computer
vascofazza
297.2 × 180.3 mm327 parts2LMIT314RC6502 General Video Adapter
tebl
99.1 × 99.7 mm80 parts2LGPL-3.0192Loewe Q2300 VGA Adapter
proboterror
65 × 50.8 mm59 parts2LNo license2Loewe VGA Module Q2500
proboterror
49.3 × 33.8 mm31 parts2LNo license2TTL 6510 Computer
StefansAI
368.3 × 215.9 mm330 parts2LNo license1OSM39
christophetoularastel-eng
388.1 × 200 mm186 parts2LGPL-3.01AVR/Arduino
8bit computer
saktheeswaranswan
297.2 × 180.3 mm327 parts2LMIT0RP2040/RP2350
All in one smc
nojan1
161.1 × 82.9 mm146 parts4LNo license0RP2040/RP2350
EVA1 v2
roberto314
218 × 125 mm141 parts2LNo license0Elfii-32k board
peclark1
177.8 × 127.1 mm14 parts2LNo license0Zeal8bit rcbus
kolontsov
105 × 30 mm6 parts2LCERN-OHL-P-2.00TTL 6510 Computer fab
StefansAI
368.3 × 215.9 mm330 parts2LNo license1Transmitter
imihajlow
51 × 45.5 mm21 parts2LGPL-3.069P8x alu card
ksr
280 × 140 mm77 parts4LNo license0Nlpgen
imihajlow
70 × 25 mm16 parts2LGPL-3.069P8x control card
ksr
280 × 140 mm55 parts4LNo license0Gd MegaII proto
baldengineer
98.8 × 115.3 mm56 parts4LMIT33
How designs wire the 74HCT86
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the 74HCT86 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 7 of 14 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 3 | Connected to: Signal 100% |
|
| GNDpin 7 | Connected to: GND 93% | — |
| VCCpin 14 | Connected to: VCC 93% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8bit computer by vascofazza, RC6502 General Video Adapter by tebl, Nlpgen by imihajlow and Gd MegaII proto pcb by baldengineer.
The 74HCT86 in open source designs
The gallery holds 17 open source boards using the 74HCT86 from 14 GitHub repositories; a typical one measures about 177.8 × 125 mm and carries around 77 components.
76% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.
The most starred is 8bit computer by vascofazza.
Parts used alongside the 74HCT86
Microcontrollers on boards using the 74HCT86
What boards using the 74HCT86 are built for
74HCT86: common questions
Where can I find a 74HCT86 reference design?
Each of the 17 boards on this page is a real design using the 74HCT86. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT86 VCC pin?
The VCC pin has a decoupling capacitor on 7 of 14 designs, most often 100 nF. Counted from the KiCad layouts of 14 open source designs using the 74HCT86.
What parts are used alongside the 74HCT86?
The 74HCT32, 74HCT08, 74HCT00, 74HCT245 and 74HCT04 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT86 use?
Most are built on AVR/Arduino (2) and RP2040/RP2350 (2).
How big is a typical board using the 74HCT86?
The median is 177.8 × 125 mm, and 76% are two-layer designs.
What is the most popular open source board using the 74HCT86?
By GitHub stars, 8bit computer by vascofazza, with 314 stars.
Can I simulate one of these boards using the 74HCT86 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.