Datalogger-EPTA
Pedro-Henrique-Macedo·Datalogger-EPTA·hardware/kicad/DATALOGGER_EPTA_FINAL.kicad_pcb
About the Datalogger-EPTA PCB
Datalogger-EPTA is an open source STM32 PCB design by Pedro-Henrique-Macedo, published on GitHub. It is a 4-layer board measuring 60 × 70 mm, with 66 components from 27 distinct parts.
Its main chip is the STM32F411RETx, from the STM32 family. Other key parts include the AMS1117CS-3.3, USBLC6-2SC6, BME280 and STEVAL-MKI196V1. By type, the board carries 35 capacitors, 16 resistors, 4 ICs, 3 connectors, 2 diodes and 1 module.
It belongs with the sensors designs in this gallery.
From the project
EPTA Payload — Datalogger Ambiental e Inercial com STM32 Projeto de hardware em KiCad 10 (arquivos salvos no formato KiCad 10; verificações executadas com kicad-cli 10.0.5).
EPTA Payload — Datalogger Ambiental e Inercial com STM32 Projeto de hardware em KiCad 10 (arquivos salvos no formato KiCad 10; verificações executadas com kicad-cli 10.0.5).
Placa de aquisição de dados com microcontrolador STM32F411RE, sensor ambiental BME280 (I²C), unidade inercial LSM6DSO (módulo STEVAL-MKI196V1, SPI), armazenamento em cartão microSD (SDIO 4 bits), interface USB-C (USB Full Speed, dispositivo) e gravação/depuração por SWD.
Main components on the Datalogger-EPTA
Datalogger-EPTA bill of materials (BOM)
66 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F411RETx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | AMS1117CS-3.3 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U4 |
| 1 | STEVAL-MKI196V1 | ST_STEVAL-MKI196V1_DIL24_P2.54mm_W15.24mm | A1 |
| 1 | ABM3-8.000MHZ-D2Y-T Abracon | Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm | Y1 |
| 1 | TYPE-C-31-M-12 USB_C_HRO_TYPE-C-31-M-12 HRO | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | DM3AT-SF-PEJM5 MicroSD_DM3AT-SF-PEJM5 Hirose | microSD_HC_Hirose_DM3AT-SF-PEJM5 | J2 |
| 1 | SWD_1x04 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | RESET | SW_SPST_TL3342 | Reset1 |
| 1 | USER | SW_SPST_TL3342 | User1 |
| 1 | BOOT | SW_SPST_TL3342 | User2 |
| 1 | SS14 Vishay | D_SMA | D1 |
| 1 | LED_Status | LED_0603_1608Metric | D2 |
| 1 | 600R@100MHz | L_0603_1608Metric | FB1 |
| 2 | 10uF | C_0805_2012Metric | C1, C21 |
| 26 | 100nF | C_0603_1608Metric | C2, C13, C14, C16, C17, C19, C20, C24 +18 |
| 1 | T491A226K010AT 22uF KEMET | CP_EIA-3216-18_Kemet-A | C3 |
| 2 | 27pF | C_0603_1608Metric | C4, C5 |
| 3 | 4.7uF | C_0805_2012Metric | C12, C18, C22 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1uF | C_0805_2012Metric | C15 |
| 2 | 5.1k | R_0603_1608Metric | R1, R2 |
| 5 | 10k | R_0603_1608Metric | R4, R6, R9, R16, R17 |
| 1 | 1k | R_0603_1608Metric | R5 |
| 2 | 4.7k | R_0603_1608Metric | R7, R8 |
| 5 | 47k | R_0603_1608Metric | R10, R11, R12, R13, R14 |
| 1 | 22 | R_0603_1608Metric | R15 |
Datalogger-EPTA design files
The KiCad project lives in the Pedro-Henrique-Macedo/Datalogger-EPTA repository on GitHub; these links point at the commit this page was built from.
Datalogger-EPTA: common questions
What microcontroller does the Datalogger-EPTA use?
The Datalogger-EPTA is built around the STM32F411RETx, from the STM32 family.
How big is the Datalogger-EPTA PCB?
The Datalogger-EPTA measures 60 × 70 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Datalogger-EPTA?
66 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Datalogger-EPTA design files?
From the Pedro-Henrique-Macedo/Datalogger-EPTA repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Datalogger-EPTA design in my own project?
The repository has no license, so all rights stay with Pedro-Henrique-Macedo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Datalogger-EPTA without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k