Heracles
Peque·heracles·hw/kicad/heracles.kicad_pcb
About the Heracles PCB
Heracles is an open source STM32 PCB design by Peque, published on GitHub. It is a 2-layer board measuring 46.5 × 64.7 mm, with 61 components from 39 distinct parts.
Its main chip is the STM32F103CBT6, from the STM32 family. Other key parts include the TB6612FNG, HC-05, LY330ALH and MMA6341L. By type, the board carries 18 capacitors, 16 resistors, 10 connectors, 5 ICs, 3 diodes and 2 transistors.
Main components on the Heracles
Heracles bill of materials (BOM)
61 components, 39 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TB6612FNG | SSOP24-P-300.0.65A | U1 |
| 1 | HC-05 | HC-0X | U2 |
| 1 | LY330ALH | LY330ALH | U3 |
| 1 | MMA6341L | MMA6341L | U4 |
| 1 | STM32F103CBT6 | LQFP48 | U5 |
| 1 | FDV301N | SOT-23_MOS | Q1 |
| 1 | FDV304P | SOT-23_MOS | Q2 |
| 1 | USB-MICRO | MICRO_USB | J1 |
| 1 | LOGIC_BAT | PIN_ARRAY_2X1 | P1 |
| 1 | MOTOR_BAT | PIN_ARRAY_2X1 | P2 |
| 1 | MOTOR_A | PIN_ARRAY_2X1 | P3 |
| 1 | MOTOR_B | PIN_ARRAY_2X1 | P4 |
| 5 | CONN_8 | pin_array_8 | P5, P6, P7, P8, P9 |
| 1 | MOTOR_CONV | PIN_ARRAY_3X1 | K1 |
| 1 | SMT-0540-S-R | SMT-0540-S-R | SP1 |
| 2 | B3U-1000P | SM1206 | SW1, SW2 |
| 1 | TPS62056 | MSOP10-0.5 | T1 |
| 1 | LM3480 | SOT23 | T2 |
| 1 | Work mode LED | SM1206 | D1 |
| 1 | DIODE | SM1206 | D2 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Low Bat LED | LED-0603 | D3 |
| 1 | 10uF | SM0603 | L1 |
| 2 | 0.1uF | SM0603 | C1, C2 |
| 1 | 10uF , 20V | SM1206 | C3 |
| 6 | 100nF | SM0603 | C6, C7, C13, C14, C15, C16 |
| 1 | 470nF | SM0603 | C8 |
| 1 | 10nF | SM0603 | C9 |
| 3 | 3.3nF | SM0603 | C10, C11, C12 |
| 1 | 10uF | SM0603_Capa | C17 |
| 2 | 100nF | SM0603_Capa | C18, C19 |
| 1 | 22uF | SM0603_Capa | C20 |
| 4 | 100k | SM0603 | R1, R3, R4, R13 |
| 2 | 470 | SM0603 | R2, R16 |
| 2 | 10k | SM0603 | R5, R11 |
| 1 | 47k | SM0603 | R6 |
| 3 | 22 | SM0603 | R7, R8, R9 |
| 1 | 1.5k | SM0603 | R10 |
| 1 | 180k | SM0603 | R12 |
| 2 | 1M | SM0603 | R14, R15 |
Heracles design files
The KiCad project lives in the Peque/heracles repository on GitHub; these links point at the commit this page was built from.
Heracles: common questions
What microcontroller does the Heracles use?
The Heracles is built around the STM32F103CBT6, from the STM32 family.
How big is the Heracles PCB?
The Heracles measures 46.5 × 64.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Heracles?
61 components, from 39 distinct parts. The full bill of materials is listed on this page.
Where can I download the Heracles design files?
From the Peque/heracles repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Heracles design in my own project?
The repository has no license, so all rights stay with Peque. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Heracles without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k