22 open source boards using the HC-05

Real designs built with the HC-05, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

22 boardsClear filters|Most starred

How designs wire the HC-05

Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the HC-05 connects to, and the resistors, capacitors and other passives placed on it.

  • The PCM-OUT pin is left unconnected on 17 of 17 designs.
  • The UART-CTS pin is left unconnected on 13 of 17 designs (a signal on 4).
  • The UART-RTS pin is left unconnected on 13 of 17 designs (GND on 4).
  • The PCM-CLK pin is left unconnected on 13 of 17 designs (5V on 4).
UART-CTSpin 3Connected to: Not connected 76% · a signal 24%
UART-RTSpin 4Connected to: Not connected 76% · GND 24%
PCM-CLKpin 5Connected to: Not connected 76% · 5V 24%
PCM-OUTpin 6Connected to: Not connected 100%
PCM-INpin 7Connected to: Not connected 100%
PCN-SYNCpin 8Connected to: Not connected 100%
AIO[0]pin 9Connected to: Not connected 100%
AIO[1]pin 10Connected to: Not connected 100%
3.3_VCCpin 12Connected to: 3.3V 92%
  • Decoupling capacitor on 54% · 100 nF (7), 10 µF (1)
GNDpin 13, 21, 22Connected to: GND 87%
Pin 14Connected to: Not connected 92%
USB_-pin 15Connected to: Not connected 100%
SPI_CSBpin 16Connected to: Not connected 100%
SPI_MOSIpin 17Connected to: Not connected 100%
SPI_MISOpin 18Connected to: Not connected 100%
SPI_CLKpin 19Connected to: Not connected 100%
USB_+pin 20Connected to: Not connected 100%
PIO[0]pin 23Connected to: Not connected 100%
PIO[1]pin 24Connected to: Not connected 77% · a signal 23%
PIO[2]pin 25Connected to: Not connected 92%
PIO[3]pin 26Connected to: Not connected 85% · a signal 15%
PIO[4]pin 27Connected to: Not connected 92%
PIO[5]pin 28Connected to: Not connected 100%
PIO[6]pin 29Connected to: Not connected 100%
PIO[7]pin 30Connected to: Not connected 100%
PIO[8]pin 31Connected to: Signal 69% · not connected 31%
  • Series resistor on 62% · 470 Ω (3), 2 kΩ (2), 1 kΩ (1)
PIO[9]pin 32Connected to: Not connected 54% · a signal 46%
  • Series resistor on 31% · 470 Ω (2), 1 kΩ (1)
PIO[10]pin 33Connected to: Not connected 100%
PIO[11]pin 34Connected to: Signal 62% · not connected 38%
  • Resistor to GND on 38% · 10 kΩ (5)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gruzik2.0 by NYDEREK, Fixed hs g431-tube sensors by DAlexis, Snaaur v1 by duongngochoan and Snaaur v1 by duongngochoan.

The HC-05 in open source designs

The gallery holds 22 open source boards using the HC-05 from 17 GitHub repositories; a typical one measures about 102.2 × 60.3 mm and carries around 58 components.

91% are two-layer designs, the rest use four layers or more, and 41% carry an open source license.

The most starred is Gruzik2.0 by NYDEREK.

Microcontrollers on boards using the HC-05

HC-05: common questions

Where can I find a HC-05 reference design?

Each of the 22 boards on this page is a real design using the HC-05. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the HC-05 PCM-OUT pin connected?

The PCM-OUT pin is left unconnected on 17 of 17 designs. Counted from the KiCad layouts of 17 open source designs using the HC-05.

How is the HC-05 UART-CTS pin connected?

The UART-CTS pin is left unconnected on 13 of 17 designs (a signal on 4). Counted from the KiCad layouts of 17 open source designs using the HC-05.

How is the HC-05 UART-RTS pin connected?

The UART-RTS pin is left unconnected on 13 of 17 designs (GND on 4). Counted from the KiCad layouts of 17 open source designs using the HC-05.

What parts are used alongside the HC-05?

The ATMEGA328P-AU, AMS1117-3.3, LM324, L7805 and LM1117-3.3 appear in the most repositories here.

Which microcontrollers do boards using the HC-05 use?

Most are built on AVR/Arduino (7), STM32 (6), NXP (1) and Microchip SAM (1).

How big is a typical board using the HC-05?

The median is 102.2 × 60.3 mm, and 91% are two-layer designs.

What is the most popular open source board using the HC-05?

By GitHub stars, Gruzik2.0 by NYDEREK, with 92 stars.

Can I simulate one of these boards using the HC-05 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part