Dsp board

perrypetiet·EasyDSP·hardware_design/dsp_board/dsp_board.kicad_pcb

Dsp board layout, top view — open source ESP32 board by perrypetiet

About the Dsp board

Dsp board is an open source ESP32 PCB design by perrypetiet, published on GitHub. It is a 2-layer board measuring 57 × 53 mm, with 71 components from 31 distinct parts.

Its main chip is the ADAU1701JSTZ, from the ESP32 family. Other key parts include the TPD2S017DBVR, AP2112K-3.3TRG1 and 24LC128-E/MS. By type, the board carries 38 capacitors, 15 resistors, 8 connectors, 6 ICs, 1 transistor and 1 crystal.

It belongs with the iot & wireless designs in this gallery.

From the project

EasyDSP development repository.

This readme will be updated to display correct and relevant information depending on the branch.

- Make the settings store on the EEPROM. ✅ - Implement more filters (Bessel?) for better low pass and high pass. - Maybe improve Python module for this verstion.

Things to include in next version: - Better PCB design to improve the noise in the audio signal coming from the Bluetooth antenna (External antenna?). - RGB status indication LED. - Case design. (3D printable). - Start working on GUI app for desktop to control the device. - More functionality in firmware, more filters and gain control.…

Dsp board, from the project README
From the project README

Main components on the Dsp board

Dsp board bill of materials (BOM)

71 components, 31 distinct parts.

QtyPartRefs
1
TPD2S017DBVR
U1
2
AP2112K-3.3TRG1
U2, U3
1
24LC128-E/MS
U4
1
ADAU1701JSTZ
U5
1
24LC128-E/MS
ESP32-S3-WROOM-1-N16R2
U6
1
BC807
Q1
1
ECS-122.8-20-3X-EN-TR
Y1
1
USB4800-03-A_REVA
J1
1
SM06B-SRSS-TB(LF)(SN)
J2
6
PJRAN1X1U01AUX
J3, J4, J5, J6, J7, J8
1
LED
D1
1
f_bead
FB1
11
100nF
C1, C5, C10, C13, C16, C19, C20, C23 +3
4
1uF
C2, C3, C7, C8
1
10nF
C4
1
4.7uF
C6
2
22pF
C9, C12
1
22uF
C11
5
10uF
C14, C15, C21, C24, C28
1
3.3nF
C17
Show 11 more
QtyPartRefs
1
56nF
C18
3
47uF
C22, C29, C34
4
47uF
C30, C31, C35, C36
4
5.6nF
C32, C33, C37, C38
2
5k1
R1, R2
1
100
R3
2
10k
R4, R5
2
1k
R6, R7
1
475
R8
3
18k
R9, R12, R15
4
560
R10, R11, R13, R14

Dsp board design files

The KiCad project lives in the perrypetiet/EasyDSP repository on GitHub; these links point at the commit this page was built from.

Dsp board: common questions

What microcontroller does the Dsp board use?

The Dsp board is built around the ADAU1701JSTZ, from the ESP32 family.

How big is the Dsp board?

The Dsp board measures 57 × 53 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dsp board?

71 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the Dsp board design files?

From the perrypetiet/EasyDSP repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Dsp board design in my own project?

The repository has no license, so all rights stay with perrypetiet. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Dsp board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in EasyDSP

Similar boards