Shmoergh switching eurorack psu
peterzimon·shmoergh-switching-eurorack-psu·schematics/hog-f1-stupdown-psu.kicad_pcb
About the Shmoergh switching eurorack psu PCB
Shmoergh switching eurorack psu is an open source PCB design by peterzimon, published on GitHub. It is a 2-layer board measuring 50 × 80 mm, with 19 components from 10 distinct parts.
Other key parts include the STUP_SX1308 and STDN-3A24-ADJ. By type, the board carries 4 connectors, 3 ICs, 2 diodes and 2 resistors.
It belongs with the audio and power & battery designs in this gallery.
From the project
Eurorack PSU (power supply unit) built from cheap and commonly available switching regulators. Powered by a DC (yes, not AC) wall wart adapter.
Main components on the Shmoergh switching eurorack psu
Shmoergh switching eurorack psu bill of materials (BOM)
19 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STUP_SX1308 | STUP-SX1308 | U1 |
| 2 | STDN-3A24-ADJ | STDN-3A24-ADJ | U2, U3 |
| 4 | Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Vertical | J1, J2, J3, J4 |
| 1 | Jack-DC | TerminalBlock_Altech_AK300-2_P5.00mm | J_IN_12V1 |
| 1 | Conn_01x03_Male | TerminalBlock_Altech_AK300-3_P5.00mm | J_OUT1 |
| 1 | SW_SPST | NSL25_01x02_Vertical | SW_ON_OFF1 |
| 5 | TestPoint | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP_12V1, TP_15V1, TP_-12V1, TP_GND1, TP_INPUT1 |
| 1 | Green LED | LED_D5.0mm | D1 |
| 1 | Red LED | LED_D5.0mm | D2 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
Shmoergh switching eurorack psu design files
The KiCad project lives in the peterzimon/shmoergh-switching-eurorack-psu repository on GitHub; these links point at the commit this page was built from.
Shmoergh switching eurorack psu: common questions
How big is the Shmoergh switching eurorack psu PCB?
The Shmoergh switching eurorack psu measures 50 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Shmoergh switching eurorack psu?
19 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Shmoergh switching eurorack psu design files?
From the peterzimon/shmoergh-switching-eurorack-psu repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Shmoergh switching eurorack psu design in my own project?
The repository has no license, so all rights stay with peterzimon. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k