Cooking thermometer
petterssonandreas·cooking_thermometer·kicad/cooking_thermometer.kicad_pcb
About the Cooking thermometer PCB
Cooking thermometer is an open source STM32 PCB design by petterssonandreas, published on GitHub under the MIT license. It is a 2-layer board measuring 75 × 40 mm, with 41 components from 33 distinct parts.
Its main chip is the STM32G0B0KETX, from the STM32 family. Other key parts include the MCP1700X-330XXTO and MCP73831-2-OT. By type, the board carries 11 resistors, 8 connectors, 8 capacitors, 5 switches, 4 diodes and 3 ICs.
It belongs with the displays & leds designs in this gallery.
From the project
Simple electronics and SW project for creating a digital cooking/meat thermometer.
Simple electronics and SW project for creating a digital cooking/meat thermometer.
A probe from an old broken thermometer is used. The probe appears to be an NTC with around 200k resistance at 25C. Tests done at different temps to get a curve for the probe, curve can be found in adc.c.
The probe is connected to the HW via a 2.5mm "mono" jack with tip detection.
Main components on the Cooking thermometer
Cooking thermometer bill of materials (BOM)
41 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G0B0KETX STM32G0B0KETx | LQFP-32_7x7mm_P0.8mm_Long_pads | U1 |
| 1 | MCP1700X-330XXTO MCP1700x-330xxTO | TO-92_Inline | U2 |
| 1 | MCP73831-2-OT | SOT-23-5_HandSoldering | U3 |
| 1 | BC547 | TO-92L_Inline_Wide | Q1 |
| 1 | FTDI | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | STLINK | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | 3V3_POWER 3V3_Power | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Battery | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | OLED_CONN | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | 5V_POWER 5V_Power | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | THERMO_CONN | Jack_Mono_2.5mm_with_Tip-Detect_Electrokit_41010270 | J8 |
| 1 | USB_C | USB_C_Receptacle_6P_TopMnt_Horizontal_Long_Pads_Electrokit_41021035 | J9 |
| 1 | Active_Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | BOOT0_SW | SW_PUSH_6mm | SW1 |
| 1 | NRST_SW | SW_PUSH_6mm | SW2 |
| 1 | UI_A_SW | SW_PUSH_6mm | SW3 |
| 1 | UI_B_SW | SW_PUSH_6mm | SW4 |
| 1 | UI_C_SW | SW_PUSH_6mm | SW5 |
| 1 | 1N5817 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | WHITE_LED | LED_D4.0mm | D2 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RED_LED_CHARGING | LED_Rectangular_W5.0mm_H2.0mm | D3 |
| 1 | GREEN_LED_PWR | LED_Rectangular_W5.0mm_H2.0mm | D4 |
| 2 | 1UF 1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 3 | 4.7UF 4.7uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C9, C10 |
| 2 | 100NF 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C8 |
| 1 | 1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 2 | 100K 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 3 | 330 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R6, R10 |
| 1 | 2k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 4K7 4k7 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 2 | 100K 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R9 |
| 1 | 10K 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
Cooking thermometer design files
The KiCad project lives in the petterssonandreas/cooking_thermometer repository on GitHub; these links point at the commit this page was built from.
Cooking thermometer: common questions
What microcontroller does the Cooking thermometer use?
The Cooking thermometer is built around the STM32G0B0KETX, from the STM32 family.
How big is the Cooking thermometer PCB?
The Cooking thermometer measures 75 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cooking thermometer?
41 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Cooking thermometer design files?
From the petterssonandreas/cooking_thermometer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Cooking thermometer design in my own project?
Yes, under the terms of its MIT license, which petterssonandreas chose for the repository.
Can I test firmware for the Cooking thermometer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k