16 open source boards using the MCP1700x-330xxTO
Real designs built with the MCP1700x-330xxTO, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Pwr io
djmdjm
91.4 × 52.1 mm51 parts2LISC3ESP32
Velocity-Based-Training
m351351
47 × 44 mm18 parts2LNo license2AVR/Arduino
Elektroniikkapaja
ripaskajaska
77 × 77 mm72 parts2LNo license0AVR/Arduino
LFR ATMega4808 V2
peterladur
70 × 90 mm64 parts2LNo license0Schematic
ButiTando
70.5 × 134 mm63 parts2LNo license0PIC
Asm pong
tecknet-gg
98.3 × 95.3 mm47 parts2LMIT0STM32
Cooking thermometer
petterssonandreas
75 × 40 mm41 parts2LMIT0ESP32
Mood star keychain
CookieCodesAI
106.8 × 102.1 mm27 parts2LNo license0ESP8266
Soilsense esp right
wasylews
70 × 30 mm26 parts10LNo license0AVR/Arduino
Elektroniikkapaja vastaanotin
ripaskajaska
77 × 77 mm58 parts2LNo license0AVR/Arduino
PCB Test
peterladur
51.6 × 67.2 mm45 parts2LNo license0ESP8266
Soilsense
wasylews
70 × 50 mm25 parts10LNo license0ESP8266
Soilsense-30x70
wasylews
70 × 32.5 mm25 parts10LNo license0RISC-V
Sensor node
unicab369
43.8 × 48.8 mm17 parts2LNo license0ESP8266
Soilsense-50x70
wasylews
70 × 50 mm25 parts10LNo license0ESP8266
Soilsense alternative
wasylews
70 × 32.5 mm25 parts10LNo license0
How designs wire the MCP1700x-330xxTO
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the MCP1700x-330xxTO connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 8 of 10 designs, most often 1 µF (then 100 nF).
- The VI pin has a decoupling capacitor on 5 of 10 designs, most often 1 µF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VIpin 2 | Connected to: 5V 80% · a signal 20% |
|
| VOpin 3 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pwr io by djmdjm, Velocity-Based-Training by m351351, Schematic by ButiTando and Mood star keychain by CookieCodesAI.
The MCP1700x-330xxTO in open source designs
The gallery holds 16 open source boards using the MCP1700x-330xxTO from 10 GitHub repositories; a typical one measures about 70 × 51 mm and carries around 34 components.
69% are two-layer designs, the rest use four layers or more, and 19% carry an open source license.
The most starred is Pwr io by djmdjm.
Parts used alongside the MCP1700x-330xxTO
Microcontrollers on boards using the MCP1700x-330xxTO
What boards using the MCP1700x-330xxTO are built for
MCP1700x-330xxTO: common questions
Where can I find a MCP1700x-330xxTO reference design?
Each of the 16 boards on this page is a real design using the MCP1700x-330xxTO. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP1700x-330xxTO VO pin?
The VO pin has a decoupling capacitor on 8 of 10 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 10 open source designs using the MCP1700x-330xxTO.
What decoupling capacitors do designs use on the MCP1700x-330xxTO VI pin?
The VI pin has a decoupling capacitor on 5 of 10 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the MCP1700x-330xxTO.
Which microcontrollers do boards using the MCP1700x-330xxTO use?
Most are built on ESP8266 (5), AVR/Arduino (4), ESP32 (2) and PIC (1).
How big is a typical board using the MCP1700x-330xxTO?
The median is 70 × 51 mm, and 69% are two-layer designs.
What is the most popular open source board using the MCP1700x-330xxTO?
By GitHub stars, Pwr io by djmdjm, with 3 stars.
Can I simulate one of these boards using the MCP1700x-330xxTO before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.