Megasquirt-MS3-Bootloader
About the Megasquirt-MS3-Bootloader PCB
Megasquirt-MS3-Bootloader is an open source PCB design by pggood, published on GitHub. It is a 4-layer board measuring 83.4 × 68.5 mm, with 79 components from 40 distinct parts.
Other key parts include the MC9S12XDP512, 74HC00, MCP2551-I/SN, A4970 and LD1117LD33C. By type, the board carries 30 resistors, 29 capacitors, 6 ICs, 5 diodes, 3 connectors and 3 jumpers.
From the project
Bootloader to initialise MS3 if you need to replace the HCS12
Main components on the Megasquirt-MS3-Bootloader
Megasquirt-MS3-Bootloader bill of materials (BOM)
79 components, 40 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MC9S12XDP512 | PQFP112 | U1 |
| 1 | 74HC00 | SOP14 | U2 |
| 1 | MCP2551-I/SN | SO8E | U3 |
| 1 | A4970 | SOICW24 | U4 |
| 1 | LD1117LD33C | SSOP8 | U5 |
| 1 | FT232RL | SSOP28 | U6 |
| 2 | 2N7002 | sot23_v2 | Q1, Q2 |
| 1 | 8mHz | crystal_hc-49u | X1 |
| 1 | SD | SDCARDmolex130203a | J1 |
| 1 | USB_B | USB_B | J2 |
| 1 | CONN_5X2 | PIN_ARRAY_5x2 | P1 |
| 1 | CONN_3X2 | pin_array_3x2 | JP1 |
| 1 | Expansion connector | pin_array_17x2 | JP2 |
| 1 | SUPP40 | DIP-40__600 | JP5 |
| 3 | DIODE | sot23 | D1, D2, D4 |
| 2 | DIODE | SM2010 | D3, D5 |
| 1 | 4.5uF | c_2220 | C1 |
| 2 | 90nF | c_0603 | C2, C21 |
| 4 | .1 | c_0603 | C3, C4, C6, C20 |
| 2 | 1nF | c_0603 | C5, C11 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 55nF | c_0805 | C7, C9 |
| 2 | 1.5uF | c_0603 | C8, C10 |
| 4 | .1uF | c_0603 | C12, C13, C14, C100 |
| 1 | 10nF | c_0603 | C15 |
| 2 | 50pF | c_0603 | C16, C18 |
| 2 | .2uF | c_0603 | C17, C19 |
| 1 | 185nF | c_0603 | C22 |
| 3 | 1uF | c_0603 | C23, C26, C27 |
| 1 | 186nF | c_0603 | C24 |
| 1 | 100N | c_0603 | C25 |
| 1 | 4.7uF | c_1808 | C28 |
| 3 | 4K7 | SM0603 | R1, R2, R21 |
| 8 | 10K | SM0603 | R3, R14, R15, R16, R18, R20, R27, R30 |
| 1 | 1 OHM | SM2010 | R4 |
| 10 | 1K | SM0603 | R5, R6, R7, R9, R10, R22, R23, R24 +2 |
| 1 | 120 | SM1206 | R8 |
| 1 | 1OHM | SM2010 | R11 |
| 1 | 10M | SM0603 | R12 |
| 1 | 330 | SM0805 | R13 |
| 4 | 470 | SM0603 | R17, R19, R25, R29 |
Megasquirt-MS3-Bootloader design files
The KiCad project lives in the pggood/Megasquirt-MS3-Bootloader repository on GitHub; these links point at the commit this page was built from.
- Layoutcircuit/ms3.kicad_pcb
Megasquirt-MS3-Bootloader: common questions
How big is the Megasquirt-MS3-Bootloader PCB?
The Megasquirt-MS3-Bootloader measures 83.4 × 68.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Megasquirt-MS3-Bootloader?
79 components, from 40 distinct parts. The full bill of materials is listed on this page.
Where can I download the Megasquirt-MS3-Bootloader design files?
From the pggood/Megasquirt-MS3-Bootloader repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Megasquirt-MS3-Bootloader design in my own project?
The repository has no license, so all rights stay with pggood. Use it as a reference, and ask the author before reusing the design.