Rpi-GC-Oven-Controller
About the Rpi-GC-Oven-Controller PCB
Rpi-GC-Oven-Controller is an open source AVR/Arduino PCB design by Pharmaceutical-Analysis, published on GitHub. It is a 2-layer board measuring 120 × 100 mm, with 58 components from 43 distinct parts.
Its main chip is the ATTINY841-SSU, from the AVR/Arduino family. Other key parts include the 4N35 and ACS712xLCTR-20A. By type, the board carries 19 resistors, 10 capacitors, 9 connectors, 7 diodes, 3 ICs and 2 transistors.
From the project
A RPi4/ RPico based synchronised multi oven controller with an optional ATTiny based power stage
SPDX-License-Identifier: CERN-OHL-P-2.0+
This source describes Open Hardware and is licensed under CERN Open Hardware Licence - Permissive v2 or later (CERN-OHL-P v2+).CERN Open Hardware Licence v2 - Permissive or later (CERN-OHL-P-2.0+).
You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-P v2+ (see LICENSE-HARDWARE).
Main components on the Rpi-GC-Oven-Controller
Rpi-GC-Oven-Controller bill of materials (BOM)
58 components, 43 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATTINY841-SSU ATMEL | SOIC-14_3.9x8.7mm_P1.27mm | IC1 |
| 1 | 4N35 FAIRCHILD SEMICONDUCTOR | 4N35S | U1 |
| 1 | ACS712xLCTR-20A | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 2 | MMBT3904 | SOT-23 | Q1, Q2 |
| 1 | Door switch ? | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J1 |
| 1 | SSR | Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J2 |
| 1 | AVR-ISP-6 | Molex_KK-254_AE-6410-06A_1x06_P2.54mm_Vertical | J3 |
| 1 | I2C-4 | Molex_KK-254_AE-6410-06A_1x06_P2.54mm_Vertical | J4 |
| 1 | I2C-4 | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J5 |
| 1 | Triac | PHOENIX_1703084 | J6 |
| 1 | 240V/110V AC | PHOENIX_1703083 | J7 |
| 1 | LOAD | PHOENIX_1703083 | J8 |
| 1 | Thermal Switch | PHOENIX_1703083 | J9 |
| 1 | 4.7k ? | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | 0k1 |
| 1 | FUSE schurter | 3132874 | F1 |
| 1 | KSC341GLFS | KSC341GLFS | S1 |
| 1 | spi/i2c | SW_A6S-1104-H_OMR | SW1 |
| 1 | MOC-3052 FAIRCHILD SEMICONDUCTOR | SOP254P916X508-6N | USM1 |
| 1 | VR MULTICOMP | MOV14D621K | VR1 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 1N4148 ? | D_SOD-123 | D2, D3, D4, D5, D6 |
| 1 | 1N4448W ? | D_SOD-123 | D7 |
| 2 | 80uH kemet | SN14P-300J | L1, L2 |
| 1 | 1u ? | C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C1 |
| 2 | 100n | C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C2, C10 |
| 1 | 47nF 400V Kemet | C_2220_5750 _1.97x5.40mm_HandSolder | C3 |
| 1 | 5.6nF 400V Kemet | C_2220_5750 _1.97x5.40mm_HandSolder | C4 |
| 1 | 10u paasonic | CP_Elec_5x5.8 | C5 |
| 1 | 100nF 400V kemet | C_2220_5750 _1.97x5.40mm_HandSolder | C6 |
| 2 | 1n | C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C7, C9 |
| 1 | 1µf Vishay | C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C8 |
| 6 | 10k ? | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R4, R5, R7, R13, R19*1 |
| 1 | 200 ? | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 2 | 1k ? | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R12 |
| 1 | 220 TE CONNECTIVITY | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 360R TE CONNECTIVITY | R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R8 |
| 1 | 4.7k ? | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9 |
| 1 | 470R TE CONNECTIVITY | R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R10 |
| 1 | 39 WELWYN | R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R11 |
| 1 | 47k ? | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14 |
| 1 | 510k MULTICOMP | R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R15 |
| 2 | 220k MULTICOMP | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R16, R17 |
| 1 | 2k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R18 |
Rpi-GC-Oven-Controller design files
The KiCad project lives in the Pharmaceutical-Analysis/Rpi-GC-Oven-Controller repository on GitHub; these links point at the commit this page was built from.
- LayoutHardware/ssr_pcb.kicad_pcb
- SchematicHardware/ssr_pcb.kicad_sch
Rpi-GC-Oven-Controller: common questions
What microcontroller does the Rpi-GC-Oven-Controller use?
The Rpi-GC-Oven-Controller is built around the ATTINY841-SSU, from the AVR/Arduino family.
How big is the Rpi-GC-Oven-Controller PCB?
The Rpi-GC-Oven-Controller measures 120 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rpi-GC-Oven-Controller?
58 components, from 43 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rpi-GC-Oven-Controller design files?
From the Pharmaceutical-Analysis/Rpi-GC-Oven-Controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Rpi-GC-Oven-Controller design in my own project?
The repository has no license, so all rights stay with Pharmaceutical-Analysis. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Rpi-GC-Oven-Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k