Mioke80
About the Mioke80 PCB
Mioke80 is an open source STM32 PCB design by phpbbireland, published on GitHub. It is a 2-layer board measuring 376 × 124 mm, with 221 components from 18 distinct parts.
Its main chip is the STM32F072CBT6, from the STM32 family. Other key parts include the PRTR5V0U2X and XC6206PxxxMR-Regulator_Linear. By type, the board carries 99 diodes, 10 capacitors, 4 resistors, 3 ICs, 2 switches and 1 connector.
It belongs with the keyboards designs in this gallery.
From the project
QMK Based Open Hardware Keyboard with 99 Keys
Just another open source / open hardware ~80% keyboard...
Ref: https://hackaday.io/project/197065-mioke80-iso-99-key-80-keyboard
+ Schematic complete... + Software 80% complete... + QMK/VIA code tested on Blackpill 411 Dev Board (see blackpill_version)... working 11th August 2024 + Keyboard works... Now loads in usevia.app... Needed work to get RGB and Encoder working...
Main components on the Mioke80
Mioke80 bill of materials (BOM)
221 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F072CBT6 | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | PRTR5V0U2X | SOT-143 | U2 |
| 1 | XC6206PxxxMR-Regulator_Linear | SOT-23 | U3 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | SW_SPST | SW_SPST_TL3342 | BOOT1, RST1 |
| 1 | 500mA | Fuse_1206_3216Metric | F1 |
| 84 | MX_SW_HS | SW_MX_HS_CPG151101S11_1u | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +76 |
| 3 | MX_SW_HS | SW_MX_HS_CPG151101S11_1.75u | MX37, MX55, MX64 |
| 8 | MX_SW_HS | SW_MX_HS_CPG151101S11_1.25u | MX72, MX89, MX90, MX91, MX93, MX94, MX95, MX96 |
| 3 | MX_SW_HS | SW_MX_HS_1U | MX75, MX78, MX81 |
| 1 | MX_SW_HS | SW_MX_HS_2.75U | MX84 |
| 1 | MX_stab | Stabilizer_MX_6.25u | S1 |
| 1 | MX_stab | Stabilizer_MX_3.00u | S2 |
| 99 | 4148 | Diode_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +91 |
| 7 | 100nF | C_0402_1005Metric | C1, C3, C4, C5, C6, C7, C8 |
| 1 | 47uF | C_0603_1608Metric | C2 |
| 2 | 1uF | C_0402_1005Metric | C9, C10 |
| 4 | 5.1k | R_0402_1005Metric | R1, R2, R3, R4 |
Mioke80 design files
The KiCad project lives in the phpbbireland/mioke80 repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/Mioke80.kicad_pcb
- Schematickicad/Mioke80.kicad_sch
Mioke80: common questions
What microcontroller does the Mioke80 use?
The Mioke80 is built around the STM32F072CBT6, from the STM32 family.
How big is the Mioke80 PCB?
The Mioke80 measures 376 × 124 mm, has 2 copper layers and is 1.2 mm thick.
How many components are on the Mioke80?
221 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mioke80 design files?
From the phpbbireland/mioke80 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mioke80 design in my own project?
The repository has no license, so all rights stay with phpbbireland. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Mioke80 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in mioke80
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k