HardLabs

DigitalOscilloscope Hardware

PiatekBartosz·DigitalOscilloscope_Hardware

DigitalOscilloscope Hardware PCB layout, top view — open source board by PiatekBartosz

About the DigitalOscilloscope Hardware PCB

DigitalOscilloscope Hardware is an open source PCB design by PiatekBartosz, published on GitHub. It is a 4-layer board measuring 150 × 150 mm, with 360 components from 74 distinct parts.

Other key parts include the AD8611ARZ, TL072, OPA656U, AD8337BCPZ-REEL-ND and AD8138ARZ. By type, the board carries 146 capacitors, 93 resistors, 60 inductors, 19 ICs, 18 diodes and 11 connectors.

It belongs with the test & measurement designs in this gallery.

From the project

Hardware for digital oscilloscope project

Main components on the DigitalOscilloscope Hardware

AD8611ARZTL072OPA656UAD8337BCPZ-REEL-NDAD8138ARZLTC2299xUPP0082_BOTTOMMOUNTNUCLEOH723ZGAZ1117-ADJADP7182AUJZDAC61408RHAR

DigitalOscilloscope Hardware bill of materials (BOM)

360 components, 74 distinct parts.

QtyPartRefs
1
AD8611ARZ
U1
1
TL072
U2
2
OPA656U
U3, U4
2
AD8337BCPZ-REEL-ND
U5, U6
2
AD8138ARZ
U8, U20
1
LTC2299xUP
U9
1
P0082_BOTTOMMOUNT
U10
1
NUCLEOH723ZG
U11
5
AZ1117-ADJ
U12, U13, U14, U15, U18
2
ADP7182AUJZ
U16, U17
1
DAC61408RHAR
U19
6
BC817
Q1, Q2, Q3, Q4, Q5, Q6
1
XLL735080.000000I
Y1
2
Conn_Coaxial
J1, J2
3
Conn_01x03_Pin
J4, J5, J7
4
Conn_01x02_Pin
J6, J8, J9, J10
1
Screw_Terminal_01x02
J11
1
Screw_Terminal_01x03
J12
5
TX2SA-5V
K1, K2, K4, K5, K6
1
AGQ200A4HZ
K7
Show 54 more
QtyPartRefs
2
BAV199
D1, D2
6
1N4148W
D3, D4, D5, D6, D7, D8
10
LED
D9, D10, D11, D12, D13, D14, D15, D16 +2
30
LCBB-601
L2, L5, L6, L7, L8, L12, L14, L21 +22
30
0.68uH, 0.8Ohm
L4, L9, L10, L11, L13, L15, L16, L17 +22
2
DNP
C1, C2
2
2.0-10.0pF
C3, C5
2
360pF
C4, C6
2
390pF
C7, C9
2
15pF
C8, C10
2
2.0-6.0pF
C11, C12
2
22nF
C13, C14
35
100nF
C16, C23, C24, C25, C26, C31, C33, C49 +27
29
1uF
C18, C27, C28, C29, C30, C37, C38, C44 +21
35
10uF
C20, C32, C34, C35, C36, C39, C40, C41 +27
9
100pF
C21, C22, C57, C58, C61, C139, C142, C143 +1
2
470pF
C53, C54
2
12pF
C71, C72
4
2.2uF
C83, C84, C87, C88
6
0.1uF
C91, C92, C138, C145, C146, C147
1
10nF
C101
7
10uF
C102, C103, C104, C105, C122, C123, C126
1
150nF
C140
1
330pF
C141
2
990k
R1, R2
8
10k
R3, R4, R20, R21, R54, R57, R99, R100
6
33R
R5, R6, R24, R25, R58, R64
8
25R
R7, R32, R33, R48, R49, R50, R51, R52
2
49.9k
R8, R10
2
953k
R9, R11
6
220R
R12, R69, R71, R75, R78, R80
1
1k
R15
1
19k
R17
3
10R
R18, R19, R34
4
20k
R22, R23, R55, R56
2
49.9 R
R26, R27
4
100 R
R28, R29, R30, R31
2
33 R
R36, R38
8
499R
R40, R41, R42, R43, R44, R45, R46, R47
3
0R
R59, R61, R68
4
DNP
R60, R62, R63, R67
3
10kR
R73, R74, R77
4
120
R82, R84, R86, R88
1
360
R83
3
200
R85, R87, R89
2
600
R90, R96
3
1k2
R91, R92, R93
1
800
R94
4
300
R95, R97, R98, R101
1
123
R102
1
510
R103
1
39k
R104
2
120k
R105, R107
1
68k
R106

DigitalOscilloscope Hardware design files

The KiCad project lives in the PiatekBartosz/DigitalOscilloscope_Hardware repository on GitHub; these links point at the commit this page was built from.

DigitalOscilloscope Hardware: common questions

How big is the DigitalOscilloscope Hardware PCB?

The DigitalOscilloscope Hardware measures 150 × 150 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the DigitalOscilloscope Hardware?

360 components, from 74 distinct parts. The full bill of materials is listed on this page.

Where can I download the DigitalOscilloscope Hardware design files?

From the PiatekBartosz/DigitalOscilloscope_Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the DigitalOscilloscope Hardware design in my own project?

The repository has no license, so all rights stay with PiatekBartosz. Use it as a reference, and ask the author before reusing the design.

Similar boards