REPO ARRELOS
About the REPO ARRELOS PCB
REPO ARRELOS is an open source ESP32 PCB design by Pierini-Franco, published on GitHub. It is a 2-layer board measuring 63.5 × 61.9 mm, with 10 components from 10 distinct parts.
Its main chip is the ESP32_DevKit_V1_36PIN, from the ESP32 family. By type, the board carries 7 connectors, 1 IC, 1 capacitor and 1 resistor.
It belongs with the iot & wireless designs in this gallery.
From the project
https://github.com/Pierini-Franco/Repositor_Automatico/assets/105557226/09ac5b65-eae8-4226-86f4-ccc1e2ff2913
https://github.com/Pierini-Franco/Repositor_Automatico/assets/105557226/09ac5b65-eae8-4226-86f4-ccc1e2ff2913
The React app provides a way to order multiple products in a single order. At the same time, employees can order a single product
Leave a ⭐ if you are interested in this repo!
Main components on the REPO ARRELOS
REPO ARRELOS bill of materials (BOM)
10 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32_DevKit_V1_36PIN | ESP32_Devkit_V1_36pin | U1 |
| 1 | Screw_Terminal_01x08 | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | IN STEP | TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | FC | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | Screw_Terminal_01x10 | IDC-Header_2x05_P2.54mm_Horizontal | J4 |
| 1 | Screw_Terminal_01x02 | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Screw_Terminal_01x04 | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Screw_Terminal_01x03 | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | 0.1u | C_Disc_D6.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 100k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
REPO ARRELOS design files
The KiCad project lives in the Pierini-Franco/Repositor_Automatico repository on GitHub; these links point at the commit this page was built from.
REPO ARRELOS: common questions
What microcontroller does the REPO ARRELOS use?
The REPO ARRELOS is built around the ESP32_DevKit_V1_36PIN, from the ESP32 family.
How big is the REPO ARRELOS PCB?
The REPO ARRELOS measures 63.5 × 61.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the REPO ARRELOS?
10 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the REPO ARRELOS design files?
From the Pierini-Franco/Repositor_Automatico repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the REPO ARRELOS design in my own project?
The repository has no license, so all rights stay with Pierini-Franco. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the REPO ARRELOS without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Repositor_Automatico
ESP32Repositor Automático V8 (Primer Final)
80.2 × 59.8 mm56 parts2LNo license1
ESP32Repositor Automático-Version 2024-4(a probar)
80.2 × 59.8 mm53 parts2LNo license1
ESP32Repositor Automático-Version 2024-3(a probar)
80.2 × 59.8 mm53 parts2LNo license1
Modulo Drivers
63.9 × 62.3 mm27 parts2LNo license1
Perifericos Sensores
99.5 × 22.3 mm23 parts2LNo license1
Placa PULL UP
30.5 × 58.9 mm11 parts2LNo license1
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k