HardLabs

96 well adapter board for Arduino mega

pierrebaillargeon·Microplate-Assistive-Pipetting-Light-Emitter·Electronics/LED Matrix - 96 well adapter board for Arduino mega/96 well adapter board for Arduino mega.kicad_pcb

96 well adapter board for Arduino mega layout, top view — open source AVR/Arduino board by pierrebaillargeon

About the 96 well adapter board for Arduino mega

96 well adapter board for Arduino mega is an open source AVR/Arduino PCB design by pierrebaillargeon, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 121.5 × 83 mm, with 15 components from 4 distinct parts.

Its main chip is the ARDUINO_MEGA_SHIELD, from the AVR/Arduino family. By type, the board carries 12 resistors and 2 connectors.

From the project

Microplate Assistive Pipetting Light Emitter (M.A.P.L.E.)

The contents of this repository represent the design files and code needed to reproduce the electronics, firmware and GUI interface for the Microplate Assistive Pipetting Light Emitter.

A manuscript describing the design and usage of this light guide has been published in the SLAS Technology journal and presented at SLAS 2019 as part of a presentation titled 'A longitudinal analysis over 10 years of enabling technologies for early drug discovery using open source tools'.

96 well adapter board for Arduino mega, from the project README
From the project README

96 well adapter board for Arduino mega bill of materials (BOM)

15 components, 4 distinct parts.

QtyPartRefs
1
Conn_01x12_Female
J1
1
Conn_01x08_Female
J2
1
ARDUINO_MEGA_SHIELD
SHIELD1
12
R
R1, R2, R3, R4, R5, R6, R7, R8 +4

96 well adapter board for Arduino mega design files

The KiCad project lives in the pierrebaillargeon/Microplate-Assistive-Pipetting-Light-Emitter repository on GitHub; these links point at the commit this page was built from.

96 well adapter board for Arduino mega: common questions

What microcontroller does the 96 well adapter board for Arduino mega use?

The 96 well adapter board for Arduino mega is built around the ARDUINO_MEGA_SHIELD, from the AVR/Arduino family.

How big is the 96 well adapter board for Arduino mega?

The 96 well adapter board for Arduino mega measures 121.5 × 83 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 96 well adapter board for Arduino mega?

15 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the 96 well adapter board for Arduino mega design files?

From the pierrebaillargeon/Microplate-Assistive-Pipetting-Light-Emitter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the 96 well adapter board for Arduino mega design in my own project?

Yes, under the terms of its GPL-3.0 license, which pierrebaillargeon chose for the repository.

Can I test firmware for the 96 well adapter board for Arduino mega without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Microplate-Assistive-Pipetting-Light-Emitter

Similar boards