HardLabs

LED Matrix - Copy

pierrebaillargeon·Microplate-Assistive-Pipetting-Light-Emitter·Electronics/LED Matrix - 384 well/LED Matrix - Copy.kicad_pcb

LED Matrix - Copy PCB layout, top view — open source board by pierrebaillargeon
Simulate this board

About the LED Matrix - Copy PCB

LED Matrix - Copy is an open source PCB design by pierrebaillargeon, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 121.5 × 83 mm, with 386 components from 3 distinct parts.

By type, the board carries 384 diodes and 2 connectors.

It belongs with the displays & leds designs in this gallery.

From the project

Microplate Assistive Pipetting Light Emitter (M.A.P.L.E.)

The contents of this repository represent the design files and code needed to reproduce the electronics, firmware and GUI interface for the Microplate Assistive Pipetting Light Emitter.

A manuscript describing the design and usage of this light guide has been published in the SLAS Technology journal and presented at SLAS 2019 as part of a presentation titled 'A longitudinal analysis over 10 years of enabling technologies for early drug discovery using open source tools'.

LED Matrix - Copy, from the project README
From the project README

LED Matrix - Copy bill of materials (BOM)

386 components, 3 distinct parts.

QtyPartRefs
1
Conn_01x24_Male
J1
1
Conn_01x16_Male
J2
384
LED
D1, D2, D3, D4, D5, D6, D7, D8 +376

LED Matrix - Copy design files

The KiCad project lives in the pierrebaillargeon/Microplate-Assistive-Pipetting-Light-Emitter repository on GitHub; these links point at the commit this page was built from.

LED Matrix - Copy: common questions

How big is the LED Matrix - Copy PCB?

The LED Matrix - Copy measures 121.5 × 83 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LED Matrix - Copy?

386 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the LED Matrix - Copy design files?

From the pierrebaillargeon/Microplate-Assistive-Pipetting-Light-Emitter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the LED Matrix - Copy design in my own project?

Yes, under the terms of its GPL-3.0 license, which pierrebaillargeon chose for the repository.

More boards in Microplate-Assistive-Pipetting-Light-Emitter

Similar boards