HardLabs

Neopixel nano - 384 well

pierrebaillargeon·Microplate-Assistive-Pipetting-Light-Emitter·Electronics/Neopixel - 384 well/Neopixel nano - 384 well.kicad_pcb

Neopixel nano - 384 well PCB layout, top view — open source board by pierrebaillargeon

About the Neopixel nano - 384 well PCB

Neopixel nano - 384 well is an open source PCB design by pierrebaillargeon, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 121.5 × 83 mm, with 769 components from 3 distinct parts.

By type, the board carries 384 diodes, 384 capacitors and 1 connector.

It belongs with the displays & leds designs in this gallery.

From the project

Microplate Assistive Pipetting Light Emitter (M.A.P.L.E.)

The contents of this repository represent the design files and code needed to reproduce the electronics, firmware and GUI interface for the Microplate Assistive Pipetting Light Emitter.

A manuscript describing the design and usage of this light guide has been published in the SLAS Technology journal and presented at SLAS 2019 as part of a presentation titled 'A longitudinal analysis over 10 years of enabling technologies for early drug discovery using open source tools'.

Neopixel nano - 384 well, from the project README
From the project README

Neopixel nano - 384 well bill of materials (BOM)

769 components, 3 distinct parts.

QtyPartRefs
1
Conn_01x03_Male
J2
384
SK6805
D1, D2, D3, D4, D5, D6, D7, D8 +376
384
CAP
C1, C2, C3, C4, C5, C6, C7, C8 +376

Neopixel nano - 384 well design files

The KiCad project lives in the pierrebaillargeon/Microplate-Assistive-Pipetting-Light-Emitter repository on GitHub; these links point at the commit this page was built from.

Neopixel nano - 384 well: common questions

How big is the Neopixel nano - 384 well PCB?

The Neopixel nano - 384 well measures 121.5 × 83 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Neopixel nano - 384 well?

769 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Neopixel nano - 384 well design files?

From the pierrebaillargeon/Microplate-Assistive-Pipetting-Light-Emitter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Neopixel nano - 384 well design in my own project?

Yes, under the terms of its GPL-3.0 license, which pierrebaillargeon chose for the repository.

More boards in Microplate-Assistive-Pipetting-Light-Emitter

Similar boards