HardLabs

Contactor Control

pilotniq·MJoulnir·Hardware/Contactor Control/Contactor Control.kicad_pcb

Contactor Control PCB layout, top view — open source board by pilotniq

About the Contactor Control PCB

Contactor Control is an open source PCB design by pilotniq, published on GitHub. It is a 2-layer board measuring 41 × 31 mm, with 9 components from 8 distinct parts.

By type, the board carries 3 connectors, 3 resistors, 2 diodes and 1 transistor.

It belongs with the power & battery designs in this gallery.

From the project

Hardware and software for the control system of a full size electric boat.

Contactor Control bill of materials (BOM)

9 components, 8 distinct parts.

QtyPartRefs
1
Q-FET-N-PMN20EN
Q1
2
Conn_01x02
J1, J2
1
Conn_02x02_Top_Bottom
J4
1
D-CMPSH1-4
D1
1
LED
D2
1
3.3k
R1
1
1M
R2
1
10k
R3

Contactor Control design files

The KiCad project lives in the pilotniq/MJoulnir repository on GitHub; these links point at the commit this page was built from.

Contactor Control: common questions

How big is the Contactor Control PCB?

The Contactor Control measures 41 × 31 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Contactor Control?

9 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Contactor Control design files?

From the pilotniq/MJoulnir repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Contactor Control design in my own project?

The repository has no license, so all rights stay with pilotniq. Use it as a reference, and ask the author before reusing the design.

More boards in MJoulnir

Similar boards