MeasureShunt
About the MeasureShunt PCB
MeasureShunt is an open source PCB design by pilotniq, published on GitHub. It is a 2-layer board measuring 27 × 35 mm, with 22 components from 14 distinct parts.
Other key parts include the MAX4081T, ADC-MCP3561 and MCP1754S-3302xCB. By type, the board carries 8 resistors, 7 capacitors, 3 ICs, 3 connectors and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
Hardware and software for the control system of a full size electric boat.
Main components on the MeasureShunt
MeasureShunt bill of materials (BOM)
22 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX4081T | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | ADC-MCP3561 | TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | MCP1754S-3302xCB | SOT-23 | U3 |
| 1 | Conn_01x02 | CON-MOLEX-CGRIDIII-1x2 RA-0901362202 | J1 |
| 1 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08 | CON-MOLEX-CGRIDIII-2x4-RA-0901303208 | J3 |
| 1 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 0.1 uF / 100V | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 3 | 10 uF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C4, C7 |
| 3 | 0.1 uF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C5, C6 |
| 1 | 200k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 5 | 10 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3, R4, R5, R6 |
| 1 | 1,5k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7 |
| 1 | 1k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8 |
MeasureShunt design files
The KiCad project lives in the pilotniq/MJoulnir repository on GitHub; these links point at the commit this page was built from.
MeasureShunt: common questions
How big is the MeasureShunt PCB?
The MeasureShunt measures 27 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MeasureShunt?
22 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the MeasureShunt design files?
From the pilotniq/MJoulnir repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the MeasureShunt design in my own project?
The repository has no license, so all rights stay with pilotniq. Use it as a reference, and ask the author before reusing the design.
More boards in MJoulnir
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k