HardLabs

Pinguino26j50

PinguinoIDE·pinguino-cad·boards/26J50/K1.0/Pinguino26j50.kicad_pcb

Pinguino26j50 PCB layout, top view — open source PIC board by PinguinoIDE

About the Pinguino26j50 PCB

Pinguino26j50 is an open source PIC PCB design by PinguinoIDE, published on GitHub under the GPL-2.0 license. It is a board measuring 69.9 × 21.6 mm, with 20 components from 18 distinct parts.

Its main chip is the PIC18F26J50, from the PIC family. By type, the board carries 5 capacitors, 4 resistors, 3 connectors, 2 relays, 2 diodes and 1 IC.

From the project

Open Hardware Pinguino boards (and extensions) CAD files (Kicad)

Most of the Pinguino boards or extensions are designed with Kicad.

KiCad is an EDA software suite for the creation of professional schematics and printed circuit boards up to 16 layers. KiCad runs on Windows, Linux and Apple OS X and is released under the open-source GNU GPL v2 free of charge. With Kicad you can do the following :

For a more detailed explanation please refer to the official site : http://www.kicad-pcb.org

Main components on the Pinguino26j50

PIC18F26J50

Pinguino26j50 bill of materials (BOM)

20 components, 18 distinct parts.

QtyPartRefs
1
PIC18F26J50
U1
1
8MHz
X1
1
Analog
P1
1
Digital
P2
1
UART
P3
1
USB
JP1
1
PWM
K1
1
Power
K2
1
Reset
SW1
1
LED
D1
1
BZX85C3V3
D2
2
22pF
C1, C2
1
CAP
C3
2
100nF
C4, C5
1
390
R1
1
5.6
R2
1
10K
R4
1
390R
R5

Pinguino26j50 design files

The KiCad project lives in the PinguinoIDE/pinguino-cad repository on GitHub; these links point at the commit this page was built from.

Pinguino26j50: common questions

What microcontroller does the Pinguino26j50 use?

The Pinguino26j50 is built around the PIC18F26J50, from the PIC family.

How big is the Pinguino26j50 PCB?

The Pinguino26j50 measures 69.9 × 21.6 mm and is 1.6002 mm thick.

How many components are on the Pinguino26j50?

20 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pinguino26j50 design files?

From the PinguinoIDE/pinguino-cad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Pinguino26j50 design in my own project?

Yes, under the terms of its GPL-2.0 license, which PinguinoIDE chose for the repository.

Can I test firmware for the Pinguino26j50 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in pinguino-cad

Similar boards