HardLabs

Pinguino47j53A

PinguinoIDE·pinguino-cad·boards/47J53/A1.2/Pinguino47j53A.kicad_pcb

Pinguino47j53A PCB layout, top view — open source PIC board by PinguinoIDE

About the Pinguino47j53A PCB

Pinguino47j53A is an open source PIC PCB design by PinguinoIDE, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 59.9 × 27.6 mm, with 36 components from 21 distinct parts.

Its main chip is the PIC18F47J53-TQFP44, from the PIC family. Other key parts include the AMS1117-3.3V (SOT-223). By type, the board carries 12 capacitors, 5 diodes, 5 resistors, 4 connectors, 2 ICs and 2 crystals.

From the project

Open Hardware Pinguino boards (and extensions) CAD files (Kicad)

Most of the Pinguino boards or extensions are designed with Kicad.

KiCad is an EDA software suite for the creation of professional schematics and printed circuit boards up to 16 layers. KiCad runs on Windows, Linux and Apple OS X and is released under the open-source GNU GPL v2 free of charge. With Kicad you can do the following :

For a more detailed explanation please refer to the official site : http://www.kicad-pcb.org

Main components on the Pinguino47j53A

PIC18F47J53-TQFP44AMS1117-3.3V (SOT-223)

Pinguino47j53A bill of materials (BOM)

36 components, 21 distinct parts.

QtyPartRefs
1
PIC18F47J53-TQFP44
U1
1
AMS1117-3.3V (SOT-223)
U2
1
IRLML6402 TRPBF 01AH (SOT-23)
Q1
1
8MHz
X1
1
32768Hz
X2
1
USB-MINI-B
CON1
2
HEADER_18
J1, J2
1
ICSP
P1
1
RESET
SW1
4
VAL**
hole_3mm_1, hole_3mm_2, hole_3mm_3, hole_3mm_4
1
Yellow LED
D1
3
1N5817 (DO-214AC/SMA)
D2, D4, D5
1
Red LED
D3
4
100nF
C1, C2, C5, C9
2
22pF
C3, C4
3
10uF/6.3V Tantal. 0805/P
C6, C8, C11
1
10nF
C10
2
10pF
C12, C13
1
10K
R1
3
470
R2, R3, R7
Show 1 more
QtyPartRefs
1
100K
R6

Pinguino47j53A design files

The KiCad project lives in the PinguinoIDE/pinguino-cad repository on GitHub; these links point at the commit this page was built from.

Pinguino47j53A: common questions

What microcontroller does the Pinguino47j53A use?

The Pinguino47j53A is built around the PIC18F47J53-TQFP44, from the PIC family.

How big is the Pinguino47j53A PCB?

The Pinguino47j53A measures 59.9 × 27.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pinguino47j53A?

36 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pinguino47j53A design files?

From the PinguinoIDE/pinguino-cad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Pinguino47j53A design in my own project?

Yes, under the terms of its GPL-2.0 license, which PinguinoIDE chose for the repository.

Can I test firmware for the Pinguino47j53A without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in pinguino-cad

Similar boards