Gabesam board
pioneers·PiElectrical·Boards/PiEDB-Y17/gabesam board/gabesam board.kicad_pcb
About the Gabesam board
Gabesam board is an open source PCB design by pioneers, published on GitHub. It is a 2-layer board measuring 109.5 × 59 mm, with 25 components from 21 distinct parts.
By type, the board carries 2 capacitors, 1 IC, 1 transistor, 1 diode, 1 inductor and 1 resistor.
From the project
PiElectrical Work and Documentation
This is the working repo for PiElectrical teams
1. ToDo 2. Repo Structure 3. Setup 4. Work Flow 5. How to Create a Gerber 6. Docu Packets 7. FAQ 8. Useful Links 9. Standards
Boards: Contains all necessary information about each board, including KiCad (and old Eagle) files, arduino test files, and board specific documentation.
Bootloaders: Contains the files necessary to burn the bootloader for boards identifying as Leonardo (Atmega32u4).

Gabesam board bill of materials (BOM)
25 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | LM25085-Q1 | U1 |
| 1 | PMOS | PowerPAK_SO-8_Single | Q1 |
| 1 | 1000 p | C_1206 | C_ADJ1 |
| 1 | 1 u | C_1206 | C_BYP1 |
| 1 | 33 u | C_1206 | C_IN1 |
| 1 | 100 u | C_1206 | C_OUT1 |
| 1 | 0.47 u | C_1206 | C_VCC1 |
| 4 | TestPoint | TestPoint_Loop_D2.60mm_Drill0.9mm_Beaded | GND1, GND2, SHUTDOWN1, V_SW1 |
| 1 | 66.5 k | R_1206 | R_3 |
| 1 | 2.1 k | R_1206 | R_ADJ1 |
| 1 | 3.4 k | R_1206 | R_FB1 |
| 1 | 10 k | R_1206 | R_FB2 |
| 1 | 0.01 | R_1206 | R_SEN1 |
| 1 | 90.9 k | R_1206 | R_T1 |
| 2 | 7 V to 42 V | TestPoint_Loop_D2.60mm_Drill0.9mm_Beaded | V_IN1, V_Testpoint1 |
| 1 | 5 V | TestPoint_Loop_D2.60mm_Drill0.9mm_Beaded | V_OUT1 |
| 1 | D_Schottky_Filled | D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | 15 u | L_1206_3216Metric | L1 |
| 1 | 3300 p | C_1206 | C1 |
| 1 | 0.1 u | C_1206 | C2 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1 m | R_1206 | R1 |
Gabesam board design files
The KiCad project lives in the pioneers/PiElectrical repository on GitHub; these links point at the commit this page was built from.
Gabesam board: common questions
How big is the Gabesam board?
The Gabesam board measures 109.5 × 59 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gabesam board?
25 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Gabesam board design files?
From the pioneers/PiElectrical repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Gabesam board design in my own project?
The repository has no license, so all rights stay with pioneers. Use it as a reference, and ask the author before reusing the design.
More boards in PiElectrical
PDB
pioneers
112.1 × 88.3 mm72 parts2LNo license8DC-DC converter v2
pioneers
53.3 × 27 mm21 parts2LNo license8Test Board
pioneers
58.8 × 24.5 mm20 parts2LNo license8Simon Says
pioneers
104.4 × 58.1 mm16 parts2LNo license8USBTTL
pioneers
26 × 32 mm11 parts2LNo license8Turbo
pioneers
32.4 × 29.9 mm7 parts2LNo license8PiE team flag
pioneers
45.7 × 50.8 mm7 parts2LNo license8Servocontrollerproject
pioneers
40.3 × 52.4 mm5 parts2LNo license8Ultrasonic
pioneers
40.5 × 45.8 mm4 parts2LNo license8