USBTTL

pioneers·PiElectrical·Boards/PiEDB-Y16/USBTTL/USBTTL.kicad_pcb

USBTTL PCB layout, top view — open source board by pioneers

About the USBTTL PCB

USBTTL is an open source PCB design by pioneers, published on GitHub. It is a 2-layer board measuring 26 × 32 mm, with 11 components from 8 distinct parts.

Other key parts include the CH340G. By type, the board carries 4 capacitors, 2 connectors, 2 resistors, 1 IC and 1 crystal.

From the project

PiElectrical Work and Documentation

To Do: - Add battery calibration (Added switch, WIP for runtime) - Create DC-DC Converter (Work In Progress) - Fix battery shorting problem (Complete) - Remove power from data port, optional power using shortings (Complete) - Consider using different port for 5v (Kept as USB)

To Do: Large Revision - Find a switch rated for 50A @ 12VDC - Fuse each motor controller port with 7.5A slow-blow fuse (MC rated for 2x 3.5A motors) (Blows in 20Sec at 10A) - Add 40A slow-blow fuse for battery. (Blows in 5 min @ 50A, Blows in 20 sec @ 55A) (Battery Max is 55A) - Add 7.5A slow-blow fuse for 5V rail.…

Main components on the USBTTL

USBTTL bill of materials (BOM)

11 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CH340G
U1
1
12MHZ
12MHz
Y1
2
CONN_01X08_PIN
Conn_01x08_Pin
J1, J2
1
USB_Type_A
USB1
1
0.01UF
0.01uF
C1
1
0.1UF
0.1uF
C2
2
22PF
22pF
C3, C4
2
22
R1, R2

USBTTL design files

The KiCad project lives in the pioneers/PiElectrical repository on GitHub; these links point at the commit this page was built from.

USBTTL: common questions

How big is the USBTTL PCB?

The USBTTL measures 26 × 32 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the USBTTL?

11 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the USBTTL design files?

From the pioneers/PiElectrical repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the USBTTL design in my own project?

The repository has no license, so all rights stay with pioneers. Use it as a reference, and ask the author before reusing the design.

More boards in PiElectrical