Parla v0-revB
About the Parla v0-revB PCB
Parla v0-revB is an open source PCB design by piruetasxyz, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 50 mm, with 25 components from 16 distinct parts.
Other key parts include the C5122557 and C19626525. By type, the board carries 10 capacitors, 5 connectors, 3 resistors, 2 ICs, 2 diodes and 1 switch.
It belongs with the audio designs in this gallery.
From the project
Cada módulo tiene su propia carpeta con un proyecto de KiCad, organizado por versión y revisión (por ejemplo parla-linea/parla-linea-v-0-rev-a/).
Cada módulo tiene su propia carpeta con un proyecto de KiCad, organizado por versión y revisión (por ejemplo parla-linea/parla-linea-v-0-rev-a/).
Esquemáticos, placas y bill of materials (BOM) de cada módulo, generados automáticamente: docs.
- parla-linea: carpeta, docs - parla-eurorack: carpeta, docs - parla-guitarra: carpeta, docs - parla-estereo: carpeta, docs - parla-linea-extensor: carpeta, docs - parla-eurorack-extensor: carpeta, docs
Main components on the Parla v0-revB
Parla v0-revB bill of materials (BOM)
25 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C5122557 PAM8403D | SOP-16_4.4x10.4mm_P1.27mm | U1 |
| 1 | C19626525 L7805 | TO-252-2 | U2 |
| 4 | AudioJack2_SwitchT | PJ301M-12-T_TN_S | J1, J2, J3, J4 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J5 |
| 2 | 50k | Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV1, RV2 |
| 1 | SW_SPDT | spdt_ssd12d00g3 | SW3 |
| 1 | C193404 1N4007 | D_SOD-323_HandSoldering | D1 |
| 1 | LED | LED_D5.0mm | D8 |
| 2 | C2895732 470n | C_Elec_4x5.4 | C1, C2 |
| 2 | C49678 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C10 |
| 3 | C77083 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6 |
| 1 | C3347 100u | CP_Elec_5x5.4 | C7 |
| 1 | C3342 220u | CP_Elec_6.3x7.7 | C8 |
| 1 | C3357 10u | CP_Elec_4x5.4 | C9 |
| 2 | C17414 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 1 | C2907232 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
Parla v0-revB design files
The KiCad project lives in the piruetasxyz/parla repository on GitHub; these links point at the commit this page was built from.
Parla v0-revB: common questions
How big is the Parla v0-revB PCB?
The Parla v0-revB measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Parla v0-revB?
25 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Parla v0-revB design files?
From the piruetasxyz/parla repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Parla v0-revB design in my own project?
Yes, under the terms of its MIT license, which piruetasxyz chose for the repository.
More boards in parla
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687