HardLabs

Connector board

PisterLab·scum-dev-board·scum-programmer/connector_board.kicad_pcb

Connector board layout, top view — open source board by PisterLab

About the Connector board

Connector board is an open source PCB design by PisterLab, published on GitHub. It is a 2-layer board measuring 41.4 × 35.1 mm, with 21 components from 9 distinct parts.

By type, the board carries 12 test points, 7 connectors, 1 diode and 1 resistor.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

feedback page: https://crystalfree.atlassian.net/wiki/x/AQDGJg

feedback page: https://crystalfree.atlassian.net/wiki/x/AQDGJg

Currently there are three versions of the dev board in this folder - scum3cdevboard is a KiCad model of the currently in-use board as of October 12th 2020. It might be not 100% accurate to the original: https://github.com/PisterLab/scum-dev-board/blob/master/SCM3CPCB.pdf - mccoy is a small 1.675 in X 1.35 in board. It has GPIO pins, an IMU, and battery power - scum3cdevboardlarge is a larger board, supposed to replace the currenly in-use board

Connector board bill of materials (BOM)

21 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
CONN_01X08
Conn_01x08
J1, J6
2
CONN_01X08
Conn_01x08
J2, J7
1
CONN_02X04_COUNTER_CLOCKWISE
Conn_02x04_Counter_Clockwise
J3
1
CONN_01X03
Conn_01x03
J4
1
CONN_01X02
Conn_01x02
J5
8
TestPoint
TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8
4
TestPoint
TP9, TP10, TP11, TP12
1
LED
D1
1
300
R1

Connector board design files

The KiCad project lives in the PisterLab/scum-dev-board repository on GitHub; these links point at the commit this page was built from.

Connector board: common questions

How big is the Connector board?

The Connector board measures 41.4 × 35.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Connector board?

21 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Connector board design files?

From the PisterLab/scum-dev-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Connector board design in my own project?

The repository has no license, so all rights stay with PisterLab. Use it as a reference, and ask the author before reusing the design.

More boards in scum-dev-board

Similar boards