Pico breakout
About the Pico breakout
Pico breakout is an open source PCB design by PisterLab, published on GitHub. It is a 2-layer board measuring 46 × 59 mm, with 7 components from 5 distinct parts.
By type, the board carries 6 connectors and 1 resistor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
feedback page: https://crystalfree.atlassian.net/wiki/x/AQDGJg
feedback page: https://crystalfree.atlassian.net/wiki/x/AQDGJg
Currently there are three versions of the dev board in this folder - scum3cdevboard is a KiCad model of the currently in-use board as of October 12th 2020. It might be not 100% accurate to the original: https://github.com/PisterLab/scum-dev-board/blob/master/SCM3CPCB.pdf - mccoy is a small 1.675 in X 1.35 in board. It has GPIO pins, an IMU, and battery power - scum3cdevboardlarge is a larger board, supposed to replace the currenly in-use board
Pico breakout bill of materials (BOM)
7 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CONN_01X20 Conn_01x20 | PinHeader_1x20_P2.54mm_Vertical | J1, J4 |
| 2 | CONN_01X20 Conn_01x20 | PinSocket_1x20_P2.54mm_Vertical | J2, J3 |
| 1 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | CONN_01X03 Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical | J6 |
| 1 | 10 | R_0603_1608Metric | R1 |
Pico breakout design files
The KiCad project lives in the PisterLab/scum-dev-board repository on GitHub; these links point at the commit this page was built from.
Pico breakout: common questions
How big is the Pico breakout?
The Pico breakout measures 46 × 59 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pico breakout?
7 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pico breakout design files?
From the PisterLab/scum-dev-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pico breakout design in my own project?
The repository has no license, so all rights stay with PisterLab. Use it as a reference, and ask the author before reusing the design.
More boards in scum-dev-board
Sulu ads1299
36.3 × 46 mm94 parts6LNo license1
Sulu ldo and reg panel
41.7 × 36.1 mm55 parts2LNo license1
Spock
46.1 × 83.1 mm52 parts2LNo license1
Scum3c devboard
46.1 × 83.1 mm52 parts2LNo license1
Connector board
41.4 × 35.1 mm21 parts2LNo license1
Pico w breakout
46 × 59 mm7 parts2LNo license1
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979