Breadboard-Power-Supply-KiCad-9.0
piyushmaru22·Breadboard-Power-Supply-KiCad-9.0
About the Breadboard-Power-Supply-KiCad-9.0 PCB
Breadboard-Power-Supply-KiCad-9.0 is an open source PCB design by piyushmaru22, published on GitHub. It is a 2-layer board measuring 36.2 × 52.9 mm, with 9 components from 8 distinct parts.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
A complete breadboard power supply module designed on the KiCad 9.0 software, which provides 3.3V and 5V output for various breadboard embedded projects. Input is a power jack, output is through header pins and screw jacks.
Breadboard-Power-Supply-KiCad-9.0 bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J1, J7 |
| 1 | 0.1 uf | C_Disc_D3.0mm_W1.6mm_P2.50mm | 0.1 uf |
| 1 | 1 uf | C_Disc_D3.0mm_W1.6mm_P2.50mm | 1 uf |
| 1 | 10 uf | C_Disc_D3.0mm_W1.6mm_P2.50mm | 10 uf |
| 1 | 330 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | 330 ohm |
| 1 | 560 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | 560 ohm |
| 1 | LM317_TO-220 | TO-220-3_Vertical | LM317 |
| 1 | LM7805_TO220 | TO-220-3_Vertical | LM7805 |
Breadboard-Power-Supply-KiCad-9.0 design files
The KiCad project lives in the piyushmaru22/Breadboard-Power-Supply-KiCad-9.0 repository on GitHub; these links point at the commit this page was built from.
Breadboard-Power-Supply-KiCad-9.0: common questions
How big is the Breadboard-Power-Supply-KiCad-9.0 PCB?
The Breadboard-Power-Supply-KiCad-9.0 measures 36.2 × 52.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Breadboard-Power-Supply-KiCad-9.0?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Breadboard-Power-Supply-KiCad-9.0 design files?
From the piyushmaru22/Breadboard-Power-Supply-KiCad-9.0 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Breadboard-Power-Supply-KiCad-9.0 design in my own project?
The repository has no license, so all rights stay with piyushmaru22. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k