Ki smart relay
pkwasniok·ki-smart-relay·hardware/hardware.kicad_pcb
About the Ki smart relay PCB
Ki smart relay is an open source ESP32 PCB design by pkwasniok, published on GitHub. It is a 2-layer board measuring 83 × 54.5 mm, with 21 components from 12 distinct parts.
Its main chip is the XIAO-ESP32-C6, from the ESP32 family. By type, the board carries 6 resistors, 5 connectors, 4 diodes, 2 transistors, 2 relays and 1 IC.
Main components on the Ki smart relay
Ki smart relay bill of materials (BOM)
21 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C6 | seeed_studio_xiao_esp32c6_dip | U1 |
| 2 | BC337 | TO-92_Inline | Q1, Q2 |
| 3 | Screw_Terminal_01x02 | SHDR2W100P0X500_1X2_1000X780X1020P | J1, J2, J3 |
| 2 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J4, J5 |
| 2 | RM85-2011-35-1005 | relpol_rm85_2011_35_1005 | K1, K2 |
| 1 | IRM-03-5 | IRM0312 | PS1 |
| 2 | 1N4001 | D_A-405_P7.62mm_Horizontal | D1, D2 |
| 1 | LED B | LED_D3.0mm | D3 |
| 1 | LED A | LED_D3.0mm | D4 |
| 2 | 330R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R3 |
| 2 | 47K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R6 |
| 2 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R5 |
Ki smart relay design files
The KiCad project lives in the pkwasniok/ki-smart-relay repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/hardware.kicad_pcb
- Schematichardware/hardware.kicad_sch
Ki smart relay: common questions
What microcontroller does the Ki smart relay use?
The Ki smart relay is built around the XIAO-ESP32-C6, from the ESP32 family.
How big is the Ki smart relay PCB?
The Ki smart relay measures 83 × 54.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ki smart relay?
21 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ki smart relay design files?
From the pkwasniok/ki-smart-relay repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ki smart relay design in my own project?
The repository has no license, so all rights stay with pkwasniok. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ki smart relay without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k