Egg LDO 1000
About the Egg LDO 1000 PCB
Egg LDO 1000 is an open source PCB design by Plaenkler, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 14 × 15 mm, with 10 components from 5 distinct parts.
Other key parts include the XC6220B331MR-G. By type, the board carries 5 connectors, 2 capacitors, 2 resistors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
USB-C PCB module with 1000 mA LDO
The EGG LDO 1000 is an expansion of the modular EGG design series, representing a larger model within the portfolio. The EGG series consists of a variety of modules that can be used independently and are based on different PCB designs. Unlike the LDO 250, the LDO 1000 is designed to handle higher current applications, offering a linear voltage regulator capable of delivering up to 1000 mA. In this model, the XC6220B331MR-G voltage regulator is utilized, providing a stable output of 3.3V and supporting a load of up to 1000 mA. This makes it significantly more suitable for higher power…
Main components on the Egg LDO 1000
Egg LDO 1000 bill of materials (BOM)
10 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC6220B331MR-G | SOT95P280X130-5N | IC1 |
| 4 | Castellated Hole | PinHeader_1x01_P2.54mm_Vertical | J1, J2, J3, J5 |
| 1 | USB4135-GF-A | USB4135GFA | J4 |
| 2 | C0603C106M8PAC7411 10uF | C0603 | C1, C2 |
| 2 | ERJ-UP3J512V 5.1K | ERJUP3 | R1, R2 |
Egg LDO 1000 design files
The KiCad project lives in the Plaenkler/Egg_LDO_1000 repository on GitHub; these links point at the commit this page was built from.
- LayoutEgg_LDO_1000.kicad_pcb
- SchematicEgg_LDO_1000.kicad_sch
Egg LDO 1000: common questions
How big is the Egg LDO 1000 PCB?
The Egg LDO 1000 measures 14 × 15 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Egg LDO 1000?
10 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Egg LDO 1000 design files?
From the Plaenkler/Egg_LDO_1000 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Egg LDO 1000 design in my own project?
Yes, under the terms of its BSD-3-Clause license, which Plaenkler chose for the repository.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979