ESP32-PDM
plektra·ESP32-PDM·hardware/pdm-4ch/analog_sw.kicad_sch
About the ESP32-PDM PCB
ESP32-PDM is an open source PCB design by plektra, published on GitHub under the MIT license. It is a board, with 56 components from 15 distinct parts.
By type, the board carries 28 resistors, 13 diodes, 9 capacitors, 4 transistors, 1 connector and 1 fuse.
It belongs with the power & battery designs in this gallery.
From the project
ESP32 based power distribution module for marine applications
An open, low-cost power distribution module for boats: solid-state outputs controlled both by ordinary panel switches and over NMEA 2000, with current and fault reporting. Built around an ESP32-S3 and Infineon PROFET+24V high-side switches, for 12 V and 24 V systems, assembled by JLCPCB.
Status: schematic phase. Both boards (hardware/pdm-4ch, hardware/pdm-hc2) are complete at schematic level and pass ERC (apart from library-version notices); no PCB layout yet. Not tested in hardware.
ESP32-PDM bill of materials (BOM)
56 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | MMBT5551 | SOT-23-3 | Q3, Q4, Q5, Q6 |
| 1 | Conn_02x05_Top_Bottom | PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | 1812L050/60GR | Fuse_1812_4532Metric | F4 |
| 9 | SMAJ30CA | D_SMA | D16, D17, D18, D19, D50, D51, D52, D53 +1 |
| 4 | BZT52C3V3 | D_SOD-123 | D20, D21, D22, D23 |
| 4 | 100nF | C_0402_1005Metric | C14, C15, C16, C17 |
| 4 | 1nF | C_0402_1005Metric | C50, C51, C52, C53 |
| 1 | 100nF/100V | C_0805_2012Metric | C54 |
| 4 | 4.7k | R_1206_3216Metric | R3, R4, R7, R8 |
| 4 | 10k | R_0402_1005Metric | R17, R21, R24, R27 |
| 4 | 1k | R_0402_1005Metric | R18, R20, R23, R26 |
| 4 | 100 | R_0402_1005Metric | R19, R22, R25, R28 |
| 4 | 10k | R_1206_3216Metric | R34, R35, R36, R37 |
| 4 | 4.7k | R_0402_1005Metric | R38, R39, R40, R41 |
| 4 | 470 | R_0402_1005Metric | R50, R51, R52, R53 |
ESP32-PDM design files
The KiCad project lives in the plektra/ESP32-PDM repository on GitHub; these links point at the commit this page was built from.
- Schematichardware/pdm-4ch/analog_sw.kicad_sch
ESP32-PDM: common questions
How many components are on the ESP32-PDM?
56 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32-PDM design files?
From the plektra/ESP32-PDM repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the ESP32-PDM design in my own project?
Yes, under the terms of its MIT license, which plektra chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k