Sauter marapi esphome
Plokkke·sauter-marapi-esphome·hardware/radiator-controller.kicad_pcb
About the Sauter marapi esphome PCB
Sauter marapi esphome is an open source ESP8266 PCB design by Plokkke, published on GitHub. It is a 2-layer board measuring 76 × 66 mm, with 15 components from 12 distinct parts.
Its main chip is the WeMos_D1_mini, from the ESP8266 family. Other key parts include the MOC3043M. By type, the board carries 3 diodes, 3 resistors, 2 ICs, 1 module, 1 transistor and 1 connector.
It belongs with the iot & wireless designs in this gallery.
From the project
ESPHome / Home Assistant pilot wire (fil pilote) controller for the Sauter Marapi tactile towel radiator — KiCad PCB, reverse engineering notes. Study phase, untested.
Module DIY qui pilote le sèche-serviettes Sauter Marapi tactile 1750 W (anthracite) depuis Home Assistant, par son fil pilote 6 ordres (Confort, Confort −1, Confort −2, Éco, Hors-gel, Arrêt).
Firmware ESPHome sur un Wemos D1 mini (ESP8266), deux optotriacs MOC3043 + diodes, un relais de repli en Éco, alimenté en 230 V par l'arrivée murale du sèche-serviettes.

Main components on the Sauter marapi esphome
Sauter marapi esphome bill of materials (BOM)
15 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MOC3043M | DIP-6_W7.62mm | U1, U2 |
| 1 | WeMos_D1_mini | WEMOS_D1_mini_SMD_sockets | MOD1 |
| 1 | MMBT2222A | SOT-23 | Q1 |
| 1 | Wall / towel rail | TerminalBlock_Phoenix_MKDS-1,5-5-5.08_1x05_P5.08mm_Horizontal | J1 |
| 1 | T500mA TR5 | Fuseholder_TR5_Littelfuse_No560_No460 | F1 |
| 1 | SRD-05VDC-SL-C | Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | HLK-PM01 | Converter_ACDC_Hi-Link_HLK-PMxx | PS1 |
| 1 | 275VAC (07D561K) | RV_Disc_D9mm_W4.1mm_P5mm | RV1 |
| 2 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 1 | 1N4148W | D_SOD-123 | D3 |
| 2 | 220 | R_0805_2012Metric | R1, R2 |
| 1 | 1k | R_0805_2012Metric | R3 |
Sauter marapi esphome design files
The KiCad project lives in the Plokkke/sauter-marapi-esphome repository on GitHub; these links point at the commit this page was built from.
Sauter marapi esphome: common questions
What microcontroller does the Sauter marapi esphome use?
The Sauter marapi esphome is built around the WeMos_D1_mini, from the ESP8266 family.
How big is the Sauter marapi esphome PCB?
The Sauter marapi esphome measures 76 × 66 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sauter marapi esphome?
15 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sauter marapi esphome design files?
From the Plokkke/sauter-marapi-esphome repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sauter marapi esphome design in my own project?
The repository has no license, so all rights stay with Plokkke. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sauter marapi esphome without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398