R1001
pluggee·R1001·pcb/R1001.kicad_pcb
About the R1001 PCB
R1001 is an open source Silicon Labs PCB design by pluggee, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 51 × 34.3 mm, with 44 components from 21 distinct parts.
Its main chip is the EFM8BB10F8G-A-QFN20R, from the Silicon Labs family. Other key parts include the DRV8825PWPR, 74LS157, ZXCT1107SA-7 and ART. By type, the board carries 21 resistors, 9 capacitors, 4 ICs, 4 test points, 2 connectors and 1 module.
It belongs with the robotics & motion designs in this gallery.
From the project
DRV8825 Based Stepper Motor Driver
Main components on the R1001
R1001 bill of materials (BOM)
44 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV8825PWPR DRV8825 Texas Instruments | SOP65P970X440X120-28NT518X310 | U1 |
| 1 | 74LS157 NXP Semiconductors | SOP65P620X530X200-16 | U2 |
| 1 | EFM8BB10F8G-A-QFN20R EFM8BB10F8G Silicon Labs | QFN50P300X300X75-20NT170X170 | U3 |
| 1 | ZXCT1107SA-7 ZXCT1107 Diodes Incorporated | SOT190P290X130X100-3 | U4 |
| 1 | ART | pluggeeLabsIcon-11x6 | A1 |
| 1 | STUFF Q_NMOS_GSD NXP USA Inc. | SOT190P290X130X100-3 | Q1 |
| 1 | PCIEXPRESS-X1 | PCIEXPRESS-X1 | J1 |
| 1 | 70553-0038 CONN_01X04 Molex | 70553-0038 | J2 |
| 2 | GRPB032MWCN-RC SOCKMALE_02x03 Sullins Connector Solutions | SOCKET127P-02X03 | JMASTER1, JSLAVE1 |
| 4 | TestPoint | TestPoint000 | TP1, TP2, TP3, TP4 |
| 4 | CC0603KRX7R9BB104 Yageo | CAPC0603 | C1, C5, C7, C12 |
| 1 | UWX1V470MCL1GB 47uF Nichicon | c_elec_8x6.5 | C3 |
| 3 | CC0603KRX5R6BB105 Yageo | CAPC0603 | C9, C14, C112 |
| 1 | CC0603KRX7R9BB103 Yageo | CAPC0603 | C10 |
| 11 | RC0603FR-0710KL Yageo | RESC0603 | R1, R2, R6, R7, R10, R11, R12, R13 +3 |
| 1 | RC0603FR-071ML Yageo | RESC0603 | R3 |
| 2 | RC0603FR-072K8L Yageo | RESC0603 | R4, R18 |
| 2 | RHC2512FTR250 Stackpole Electronics Inc. | RESC2512 | R5, R9 |
| 2 | RC0603FR-071KL Yageo | RESC0603 | R8, R19 |
| 1 | ERJ-8CWFR050V Panasonic Electronic Components | RESC1206 | R15 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | RC0603FR-07100KL Yageo | RESC0603 | R120, R121 |
R1001 design files
The KiCad project lives in the pluggee/R1001 repository on GitHub; these links point at the commit this page was built from.
R1001: common questions
What microcontroller does the R1001 use?
The R1001 is built around the EFM8BB10F8G-A-QFN20R, from the Silicon Labs family.
How big is the R1001 PCB?
The R1001 measures 51 × 34.3 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the R1001?
44 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the R1001 design files?
From the pluggee/R1001 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the R1001 design in my own project?
Yes, under the terms of its GPL-3.0 license, which pluggee chose for the repository.
Can I test firmware for the R1001 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Silicon Labs firmware against it before you order a PCB.
Similar boards
Silicon Labs
Tomu hardware
im-tomu
13 × 9.4 mm11 parts2LCC-BY-SA-4.0365Silicon Labs
One key
ahtn
14.5 × 14.5 mm10 parts2LNo license96Silicon Labs
2key
ahtn
36.5 × 17.5 mm7 parts2LNo license96Silicon Labs
Ble soil moisture sensor
Miceuz
170 × 18 mm33 parts2LApache-2.033Silicon Labs
Ble soil moisture sensor pannel
Miceuz
170 × 36 mm29 parts2LApache-2.033Silicon Labs
Ym2413 dev
andete
115 × 45 mm146 parts2LNo license25