12 open source boards using the DRV8825PWPR
Real designs built with the DRV8825PWPR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Tobor
evezor
263.5 × 63.5 mm122 parts2LCERN-OHL-P-2.0126RP2040/RP2350
CinderV2-Filament-Dryer
CircuitGuy943
60 × 90 mm40 parts2LGPL-3.04AVR/Arduino
LockLoop
rmingon
37 × 49 mm34 parts2LCERN-OHL-P-2.03RISC-V
PickOMatic-V2
rmingon
100 × 100 mm146 parts4LCERN-OHL-S-2.01Silicon Labs
R1001
pluggee
51 × 34.3 mm44 parts4LGPL-3.01STM32
Fome mc
halbritt
162 × 115 mm462 parts4LNo license0STM32
XBT Autolauncher 3.0
cxs1529
310 × 100 mm216 parts2LNo license0Arm v3
evezor
250.2 × 63.3 mm100 parts4LCERN-OHL-P-2.0126DRV8825-breakoutBoard
louisbabeschneider
19 × 36.6 mm3 parts2LNo license0Standalone DRV8825
ReadHeadRedemption
38.7 × 23.3 mm19 parts2LNo license0In case ghosting fails Standalone DRV8825
ReadHeadRedemption
42.5 × 31.2 mm15 parts2LNo license0Standalone DRV8825 V1
ReadHeadRedemption
35.6 × 26.7 mm15 parts2LNo license0
How designs wire the DRV8825PWPR
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the DRV8825PWPR connects to, and the resistors, capacitors and other passives placed on it.
- The CP1 pin has a series capacitor on 7 of 9 designs, most often 10 nF.
- The CP2 pin has a series capacitor on 7 of 9 designs, most often 10 nF.
- The ISENA pin has a resistor to GND on 7 of 9 designs, most often 100 mΩ (then 200 mΩ).
- The ISENB pin has a resistor to GND on 7 of 9 designs, most often 100 mΩ (then 200 mΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CP1pin 1 | Connected to: Signal 89% |
|
| CP2pin 2 | Connected to: Signal 89% |
|
| VCPpin 3 | Connected to: Signal 89% |
|
| VMApin 4 | Connected to: 12V 56% · a signal 44% |
|
| ISENApin 6 | Connected to: A connector 22% |
|
| ISENBpin 9 | Connected to: A connector 22% |
|
| VMBpin 11 | Connected to: 12V 67% · a signal 33% |
|
| GNDpin 14, 28 | Connected to: GND 89% | — |
| V3P3OUTpin 15 | Connected to: Signal 56% · not connected 22% · 3.3V 22% |
|
| NFAULTpin 18 | Connected to: The microcontroller 22% · not connected 22% |
|
| DECAYpin 19 | Connected to: Not connected 78% · a signal 22% | — |
| NCpin 23 | Connected to: Not connected 100% | — |
| NHOMEpin 27 | Connected to: Not connected 67% · a signal 33% | — |
| GND_3pin 29 | Connected to: GND 78% · not connected 22% | — |
| Pin 30 | Connected to: Not connected 67% · GND 33% | — |
| Pin 31 | Connected to: Not connected 67% · GND 33% | — |
| Pin 32 | Connected to: Not connected 67% · GND 33% | — |
| Pin 33 | Connected to: Not connected 67% · GND 33% | — |
| Pin 34 | Connected to: Not connected 67% · GND 33% | — |
| Pin 35 | Connected to: Not connected 67% · GND 33% | — |
| Pin 36 | Connected to: Not connected 67% · GND 33% | — |
| Pin 37 | Connected to: Not connected 67% · GND 33% | — |
| Pin 38 | Connected to: Not connected 67% · GND 33% | — |
| Pin 39 | Connected to: Not connected 67% · GND 33% | — |
| Pin 40 | Connected to: Not connected 67% · GND 33% | — |
| Pin 41 | Connected to: Not connected 67% · GND 33% | — |
| Pin 42 | Connected to: Not connected 67% · GND 33% | — |
| Pin 43 | Connected to: Not connected 67% · GND 33% | — |
| Pin 44 | Connected to: Not connected 67% · GND 33% | — |
| Pin 45 | Connected to: Not connected 67% · GND 33% | — |
| Pin 46 | Connected to: Not connected 67% · GND 33% | — |
| Pin 47 | Connected to: Not connected 67% · GND 33% | — |
| Pin 48 | Connected to: Not connected 67% · GND 33% | — |
| Pin 49 | Connected to: Not connected 67% · GND 33% | — |
| Pin 50 | Connected to: Not connected 67% · GND 33% | — |
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Arm v3 by evezor, CinderV2-Filament-Dryer by CircuitGuy943, LockLoop by rmingon and R1001 by pluggee.
The DRV8825PWPR in open source designs
The gallery holds 12 open source boards using the DRV8825PWPR from 9 GitHub repositories; a typical one measures about 55.5 × 56.1 mm and carries around 42 components.
67% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Tobor by evezor.
Microcontrollers on boards using the DRV8825PWPR
What boards using the DRV8825PWPR are built for
DRV8825PWPR: common questions
Where can I find a DRV8825PWPR reference design?
Each of the 12 boards on this page is a real design using the DRV8825PWPR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the DRV8825PWPR CP1 pin connected?
The CP1 pin has a series capacitor on 7 of 9 designs, most often 10 nF. Counted from the KiCad layouts of 9 open source designs using the DRV8825PWPR.
How is the DRV8825PWPR CP2 pin connected?
The CP2 pin has a series capacitor on 7 of 9 designs, most often 10 nF. Counted from the KiCad layouts of 9 open source designs using the DRV8825PWPR.
What resistor goes on the DRV8825PWPR ISENA pin?
The ISENA pin has a resistor to GND on 7 of 9 designs, most often 100 mΩ (then 200 mΩ). Counted from the KiCad layouts of 9 open source designs using the DRV8825PWPR.
Which microcontrollers do boards using the DRV8825PWPR use?
Most are built on STM32 (2), AVR/Arduino (1), ESP32 (1) and RISC-V (1).
How big is a typical board using the DRV8825PWPR?
The median is 55.5 × 56.1 mm, and 67% are two-layer designs.
What is the most popular open source board using the DRV8825PWPR?
By GitHub stars, Tobor by evezor, with 126 stars.
Can I simulate one of these boards using the DRV8825PWPR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.