Advent candles v 1.2
About the Advent candles v 1.2 PCB
Advent candles v 1.2 is an open source AVR/Arduino PCB design by pmacik, published on GitHub. It is a 2-layer board measuring 45 × 38.6 mm, with 10 components from 4 distinct parts.
Its main chip is the ARDUINO_MINI, from the AVR/Arduino family. Other key parts include the DS1307-MODULE. By type, the board carries 4 diodes, 4 resistors, 1 IC and 1 module.
Main components on the Advent candles v 1.2
Advent candles v 1.2 bill of materials (BOM)
10 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ARDUINO_MINI | arduino_mini | U1 |
| 1 | DS1307-MODULE | DS1307-MODULE | MOD1 |
| 4 | LED | LED-5MM | D1, D2, D3, D4 |
| 4 | R | R3-LARGE_PADS | R1, R2, R3, R4 |
Advent candles v 1.2 design files
The KiCad project lives in the pmacik/electronics repository on GitHub; these links point at the commit this page was built from.
Advent candles v 1.2: common questions
What microcontroller does the Advent candles v 1.2 use?
The Advent candles v 1.2 is built around the ARDUINO_MINI, from the AVR/Arduino family.
How big is the Advent candles v 1.2 PCB?
The Advent candles v 1.2 measures 45 × 38.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Advent candles v 1.2?
10 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Advent candles v 1.2 design files?
From the pmacik/electronics repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Advent candles v 1.2 design in my own project?
The repository has no license, so all rights stay with pmacik. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Advent candles v 1.2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in electronics
Led matrix v2.0
105.4 × 64.1 mm90 parts2LNo license1
Led matrix-LED3mm
59.9 × 50.3 mm66 parts2LNo license1
AVR/ArduinoDoor v1.3
21.6 × 51.4 mm19 parts2LNo license1
AVR/ArduinoThermovest
36.3 × 60.1 mm18 parts2LNo license1
AVR/ArduinoAdvent candles
9.1 × 27.4 mm10 parts2LNo license1
AVR/ArduinoAdvent candles v 1.1
45 × 38.6 mm10 parts2LNo license1
AVR/ArduinoDH11-I2C
27.9 × 3.8 mm7 parts2LNo license1
Multiregister2
23.9 × 7.9 mm6 parts2LNo license1
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k