Thermovest
pmacik·electronics·KiCad/thermovest/thermovest.kicad_pcb
About the Thermovest PCB
Thermovest is an open source AVR/Arduino PCB design by pmacik, published on GitHub. It is a 2-layer board measuring 36.3 × 60.1 mm, with 18 components from 11 distinct parts.
Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. By type, the board carries 9 resistors, 2 connectors, 2 diodes, 1 module and 1 transistor.
Main components on the Thermovest
Thermovest bill of materials (BOM)
18 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Arduino_Nano_v3.x | Arduino_Nano | A1 |
| 1 | Q_NMOS_GDS | TO220-123 | Q1 |
| 1 | Power In | USB-mini | J1 |
| 1 | Thermo Out | USB-A | J2 |
| 1 | Requested Temp (4k7) | Trimr | RV1 |
| 1 | Min Temp (1k) | Trimr | RV2 |
| 1 | Max Temp (1k) | Trimr | RV3 |
| 1 | Min Led (blue) | LED-3MM-Large-pads | D1 |
| 1 | Max LED (red) | LED-3MM-Large-pads | D2 |
| 3 | 1k | R4_LARGE_PADS | R1, R2, R3 |
| 6 | 220R | R4_LARGE_PADS | R4, R5, R6, R7, R8, R9 |
Thermovest design files
The KiCad project lives in the pmacik/electronics repository on GitHub; these links point at the commit this page was built from.
Thermovest: common questions
What microcontroller does the Thermovest use?
The Thermovest is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.
How big is the Thermovest PCB?
The Thermovest measures 36.3 × 60.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Thermovest?
18 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Thermovest design files?
From the pmacik/electronics repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Thermovest design in my own project?
The repository has no license, so all rights stay with pmacik. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Thermovest without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in electronics
Led matrix v2.0
pmacik
105.4 × 64.1 mm90 parts2LNo license1Led matrix-LED3mm
pmacik
59.9 × 50.3 mm66 parts2LNo license1AVR/Arduino
Door v1.3
pmacik
21.6 × 51.4 mm19 parts2LNo license1AVR/Arduino
Advent candles
pmacik
9.1 × 27.4 mm10 parts2LNo license1AVR/Arduino
Advent candles v 1.2
pmacik
45 × 38.6 mm10 parts2LNo license1AVR/Arduino
Advent candles v 1.1
pmacik
45 × 38.6 mm10 parts2LNo license1AVR/Arduino
DH11-I2C
pmacik
27.9 × 3.8 mm7 parts2LNo license1Multiregister2
pmacik
23.9 × 7.9 mm6 parts2LNo license1
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k