LambdaTail-HW

pmnxis·LambdaTail-HW

LambdaTail-HW PCB layout, top view — open source ESP32 board by pmnxis

About the LambdaTail-HW PCB

LambdaTail-HW is an open source ESP32 PCB design by pmnxis, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 55 × 55 mm, with 64 components from 23 distinct parts.

Its main chip is the ESP32-WROOM-32E (4MB), from the ESP32 family. Other key parts include the RT8259GJ6 and 74HC4049. By type, the board carries 25 resistors, 20 capacitors, 6 transistors, 5 connectors, 3 ICs and 3 diodes.

It belongs with the iot & wireless designs in this gallery.

From the project

Lambda Arcade Game IoT Node Hardware with RISC-V

The goal of this repository is to make Rust + RISC-V + Kicad6 based hardware. And IoT node should be published to large number of devices. So aimed to manufacture with low-cost with less-BOM.

While monitor vend side, send signal to server or process something.

Follow to original owner's license for footprint and related things.

LambdaTail-HW, from the project README
From the project README

Main components on the LambdaTail-HW

LambdaTail-HW bill of materials (BOM)

64 components, 23 distinct parts.

QtyPartRefs
1
ESP32-WROOM-32E (4MB)
Espressif Systems
U1
1
RT8259GJ6
Richtek
U2
1
74HC4049
On Semi
U3
6
NTK3134NT1G
ON Semicon
Q1, Q2, Q3, Q4, Q5, Q6
1
DC JACK - (5.0x2.0 pi)
ANY
J1
2
53014-1010
Molex
J2, J4
2
Push_In_2.54mm_Terminal_141V-8P
Dinkle or DEGSON
J3, J5
1
TC2030-IDC
DEBUG1
1
SMAJ16CA
ANY
D1
1
LED_RED
ANY
D2
1
B240AQ-13-F
D3
1
VLS6045EX-4R7M
Taiyo Yuden
L1
4
22uF
ANY
C1, C8, C12, C20
8
100nF
ANY
C2, C3, C4, C6, C9, C17, C18, C19
1
10uF
ANY
C5
7
10nF
ANY
C7, C10, C11, C13, C14, C15, C16
2
10k
ANY
R1, R2
3
100
ANY
R3, R4, R5
7
4.7k
ANY
R6, R16, R17, R18, R19, R24, R25
1
62k
ANY
R7
Show 3 more
QtyPartRefs
1
16k
ANY
R8
1
3.6k
ANY
R9
10
51k
ANY
R10, R11, R12, R13, R14, R15, R20, R21 +2

LambdaTail-HW design files

The KiCad project lives in the pmnxis/LambdaTail-HW repository on GitHub; these links point at the commit this page was built from.

LambdaTail-HW: common questions

What microcontroller does the LambdaTail-HW use?

The LambdaTail-HW is built around the ESP32-WROOM-32E (4MB), from the ESP32 family.

How big is the LambdaTail-HW PCB?

The LambdaTail-HW measures 55 × 55 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LambdaTail-HW?

64 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the LambdaTail-HW design files?

From the pmnxis/LambdaTail-HW repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the LambdaTail-HW design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which pmnxis chose for the repository.

Can I test firmware for the LambdaTail-HW without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards